ALL ELECTRONICS COMPONENTS

1N4752A 33V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 33V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 1000mA

Electronic Spices 5000Pcs 47 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 47 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 47 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

0.33uf / 50V Aluminum Electrolytic Capacitors (5 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 5 x11mm
4. Voltage Rating :  50V
5. Capacitance: 0.33uf
6. Capacitance tolerance : ±20%(M)

H8C1VB Encoder DIP 9 pins IC (Pack -1)

Specification:

• chip of a semiconductor 
• High quality product 
• Bettar work with HT12D Dicoder
• Good ripple rejection
• Low noise

1000 Pcs 15K Ohm (Ω) 1 Watt ±5% Tolerance 15K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 15K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

Electronic Spices 1000Pcs 1.5 Ohm (Ω) 2watt ±5% Tolerance 1.5 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 1.5 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

1.5μF 155J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 15.5mm
8. Dimensions of Length : 33.0mm

0.47μF 474J 400VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400 VAC
• Dimensions = 36.0mm(W)
• Dimensions = 24.5mm(H)
• Dimensions = 15.5mm(T)
• Dimensions = 30.0mm(P)
• Dimensions = 0.8(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

SMA, S2M 1000V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 60A
6. Maxim forward voltage : 1.1V

TL082 JFET Input Operational Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typica
• Low Power Consumption: 1.4 mA/ch Typical
• Wide Common-Mode and Differential Voltage Ranges

KBPC25-W, MB354W 35A 400V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25-W
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Maxim forward voltage : 1.1V

10000uf / 16V Aluminum Electrolytic Capacitors (18 X 35.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 18 X 35.5mm
4. Voltage Rating :  16V
5. Capacitance: 10000uf
6. Capacitance tolerance : ±20%(M)