ALL ELECTRONICS COMPONENTS

4.7µF 400V Aluminum Electrolytic Capacitors (10 x 12.5 mm) Pack of 5pcs

Specification:

• Rating Voltage = 400V
• Material = Aluminum
• Capacitor Size = 10 x 12.5 mm
• Ripple current = 0.086
• Case Dia = D=10?16
• DC Leakage Current = ≤ 0.03CV+10 (uf) at 20°C
• Shelf Life = After storage for 1000 Hrs at + 105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”

SA12 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 13.3 , Max(V) 16.3
• Maximum peak current : 22.7A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

HER206 600V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 600V
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 70ns
• Package : DO-15

SMB(G), ER3D 200V Surface Mount Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : SMB(G)
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.95V

KBU, KBU8A 8A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBU
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

MBS, MB4S 0.5A 400V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : MBS
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 0.5A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 35A
6. Maxim forward voltage : 1.0V

BC858LT1 100mA 30V SOT-23 PNP Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 30V
4. Power dissipation: 250mW
5. Case: SOT23
6. Frequency: 100MHz
7. Gain H(fe): 125/800
8. Collector current:  100mA

20 Pcs 560 Ohm (Ω) 1 Watt ±5% Tolerance 560 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

• Resistance: 560 ohm
• Tolerance: 5%
• Resistor type: carbon film
• Power rating: 1W
• Max. operating voltage: 180V to 240V

74HC148 8 to 3-Line Priority Encoder SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: − 0.5 to + 7.0V
• Operating Voltage Range of 2 V to 6 V
• Typical tpd = 16 ns
• ±4-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Low Power Consumption, 80-µA Max ICC
• Outputs Can Drive Up To 10 LSTTL Loads

0.33 µF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 0.33uf
• Tolerance :  ± 10%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

0.0033μF 332J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 16.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

100uf / 35V Aluminum Electrolytic Capacitors (6.3 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminium
3. Capacitor Size: 6.3 X 11mm
4. Voltage Rating :  35V
5. Capacitance: 100uf
6. Capacitance tolerance : ±20%(M)