ALL ELECTRONICS COMPONENTS

KBPC25-W, MB251W 25A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25-W
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

SMBJ5.0A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 6.40V
3. Maximum Breakdown voltage : 7.08V
4. Stand-off voltage : 5.0
5. Maximum reverse leakage current : 800
6. Maximum peak pulse current : 65.2A
7. Maximum clamping voltage : 9.2V
8. Power dissipation : 600W

74HC164 8-Bit Serial In/Parallel out Shift Register SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply voltage range: 2V to 6V
• Supply Voltage: − 0.5 to + 7.0V
• Typical propagation delay: 19 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -55°C to 150°C

IRF740 400V 10A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 400V
• Continuous Drain Current (Id): 10A
• Drain-Source Resistance (Rds On): 0.54 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 53 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 134W

P6KE440A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 418.0V
• Maximum Breakdown voltage: 462.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 1.00A
• Maximum clamping voltage: 600.0V
• Maximum Temperature Coefficient of VBR: 0.113%
• Power Dissipation: 600W
• Package: DO-15

220uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 220uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

0.018μF 183J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.0mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω

R-6, FR603G 200V Glass Passivated Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : R-6
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 10µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.3V
7. Maximum reverse recovery time : 150ns

HER203 200V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 200V
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : DO-15

0.0018μF 182J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 16.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 7.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

1S40 40V ,R-1 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 40V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : R-1

SR280/SB280 80V ,DO-15 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 80V
• Maximum average rectified current : 2.0A
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : DO-15