ALL ELECTRONICS COMPONENTS

GBJ6, GBJ604 6A 400V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.0V

WOB, 2W04 2A 400V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : WOB
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

INA114 Precision Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Packages: 8-Pin
• Low offset voltage: 50µv max
• Low drift: 0.25µv/°C max
• Low input bias current: 2na max
• High common-mode rejection: 115db min
• Input over-voltage protection: ±40V
• Wide supply range: ±2.25 to ±18V
• Low quiescent current: 3ma max

0.0068μF 682J 400V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 400V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 5.0mm
8. Dimensions of Length : 13.0mm

DO-15, BY298 400V Fast Recovery Rectifiers Diode pack of 5pcs

Specification 

1. Maximum respective peak reverse voltage : 400v
2. Maximum average rectified current : 2.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-15
5. Non-Repetitive Peak Forward Surge Current : 70A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 1.3V
8. Maximum reverse recovery time  500ns

FR1M 1000V ,Surface Mount Fast Recovery Rectifiers Pack of 5pcs

Specification:-

1. Package : SMA(G)
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 1.0A
4. Forward peak surge current@8.3ms single half sine-wave : 30A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 500ns

SMBJ16 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 17.8V
3. Maximum Breakdown voltage : 21.8V
4. Stand-off voltage : 16.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 20.8A
7. Maximum clamping voltage : 28.8V
8. Power dissipation : 600W

BZT52C15 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 15.0V
• Minimum Zener voltage : 13.8V
• Maximum Zener voltage : 15.6V
• Maximum Reverse Leakage Current : 0.1µa
• Package : SOD-123

120µF 400V Aluminum Electrolytic Capacitors (18 x 35.5 mm) Pack of 5pcs

Specification:

• Rating Voltage = 400V
• Material = Aluminum
• Capacitor Size = 18 x 35.5 mm
• Ripple current = 0.67
• Case Dia = D=16?18
• DC Leakage Current = ≤ 0.03CV+10 (uf) at 20°C
• Shelf Life = After storage for 1000 Hrs at + 105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”

7.5k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 7.5k MR Ω ohm MF Through Hole Resistors Axial Lead Pack of 5000

Specification:-

• Resistance: 7.5K ohm (Ω)
• Resistor type: carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

L6565 Quasi-Resonant SMPS Controller SMD IC

Specification:-

• Mounting: SMD
• Number of Pins:8
• Input Voltage: 12 V
• Output Current (Max): 400 mA
• Power Supply Voltage: 10.3V ~ 18V
• Temperature Range: -40°C to +150°C

0.47μF 474J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 8.5mm
• Lmax = 20.5mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)