ALL ELECTRONICS COMPONENTS

1S80 80V ,R-1 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 80V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : R-1

GBU, GBU2502 25A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

GBU, GBU1002 10A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 10.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

BZT52C13S 200mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 200mW
• Nominal Zener Voltage : 13V
• Minimum Zener voltage : 12.4V
• Maximum Zener voltage : 14.1V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

BZT52C7V5 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 7.5V
• Minimum Zener voltage : 7.0V
• Maximum Zener voltage : 7.9V
• Maximum Reverse Leakage Current : 1µa
• Package : SOD-123

0.68μF 684J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 11.0mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

SMBJ16 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 17.8V
3. Maximum Breakdown voltage : 21.8V
4. Stand-off voltage : 16.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 20.8A
7. Maximum clamping voltage : 28.8V
8. Power dissipation : 600W

47uf 63V Aluminum Electrolytic Capacitors (8 X 11.5 mm) Pack of 5pcs

Specification

• Rating Voltage = 63V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 220
• Ripple current = 210
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

INA128 Low Power Instrumentation Amplifier SMD IC

Specification:-

• IC Name: INA128 
• Low Offset Voltage: 25 uv Typical
• Low Input Bias Current: 50 nA Typical (t)
• High CMR: 95 dB Typical”)
• Inputs Protected to ± 40V
• Wide Supply Range: ±2.25 V to ± 18V
• Low Quiescent Current: 2 mA Typical

24C1024 1M bit Serial I2C Bus EEPROM IC (DIP-8 Package)

Specification:-

• Low-voltage Operation – 2.7 (VCC = 2.7V to 5.5V)
• Voltage on Any Pin with Respect to Ground: -1.0V to +7.0V
• Storage temperature: -65°C to +150°C
• Operating Temperature: -55°C to +125°C
• Maximum Operating Voltage: 6.25V
• DC Output Current: 5.0 mA
• 400 kHz (2.7V) and 1 MHz (5V) Clock Rate
• 256-byte Page Write Mode (Partial Page Writes Allowed)

P4KE15A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 14.3 , Max(V) 15.8
• Maximum peak current : 20A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

0.068μF 683J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 6.5mm
• Lmax = 20.5mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)