ALL ELECTRONICS COMPONENTS

0.0022μF 222J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 11.0mm(W)
• Dimensions = 10.0mm(H)
• Dimensions = 5.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

BZT52C27S 200mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 200mW
• Nominal Zener Voltage : 27V
• Minimum Zener voltage : 25.1V
• Maximum Zener voltage : 28.9V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

BS170 60V 500mA N-Channel Small Signal MOSFET (TO-92 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 60V
• Continuous Drain Current (Id): 500 mA
• Drain-Source Resistance (Rds On): 50Ohms
• Gate-Source Voltage (Vgs): 20V
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 350W

MM1Z3B6 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 3.6V
• Minimum Zener voltage : 3.528V
• Maximum Zener voltage : 3.672V
• Maximum Reverse Leakage Current : 10µa
• Package : SOD-123

KBC6, KBPC602 6A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBC6
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 175A
6. Maxim forward voltage : 1.1V

MM3Z5256B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 30V
• Minimum Zener voltage : 28.5V
• Maximum Zener voltage : 31.5V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

74LS14 Hex Schmitt Trigger Inverter IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: -65°C to +150°C

74HC154 4-Line to 16-Line Decoder/Demultiplexer SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• DC Output Current, per pin: ± 25mA
• Operating Voltage Range: 2.0 to 6.0 V
• Low input current: 1 µA maximum
• Typical propagation delay: 21 ns

CD4518 Dual BCD Up Counter IC (DIP-16 Package)

Specification:-

• Maximum input current of 1 µA at 18 V 
• Noise margin (over full package-temperature range):
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• 100% tested for quiescent current at 20 V
• Standardized, symmetrical output characteristics

LM331 Precision Voltage to Frequency Converter IC

Specification:-

• Supply Voltage: 50V
• Operates on Single 5-V Supply
• Frequency: 1 Hz to 100 kHz
• Lead Temperature: 260°C
• Low Power Consumption: 15 mW Typical at 5 V
• Excellent Temperature Stability: ±50 ppm/°C Maximum

0.12μF 124K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.2mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.0047μF 472J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω