ALL ELECTRONICS COMPONENTS

SMBJ14 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 15.6V
3. Maximum Breakdown voltage : 19.1V
4. Stand-off voltage : 14.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 23.3A
7. Maximum clamping voltage : 25.8V
8. Power dissipation : 600W

DBS, DB156S 1.5A 800V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : DBS
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 1.5A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

47µF 200V Aluminum Electrolytic Capacitors (13 x 20 mm) Pack of 5pcs

Specification:

• Rating Voltage = 200V
• Material = Aluminum
• Capacitor Size = 13 x 20 mm
• Ripple current = 0.22
• Case Dia = D=13
• DC Leakage Current = ≤ 0.03CV+10 (µF) at 20°C
• Shelf Life = After storage for 1000 Hrs at + 105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”

5KP7.0A 1000µA ,R-6 Transient Voltage Suppressor Pack of 100

pecification:

• Minimum Breakdown voltage: 7.78V
• Maximum Breakdown voltage: 8.60V
• Maximum Reverse Leakage Current: 1000µa
• Maximum peak pulse current: 417A
• Maximum clamping voltage: 12.0V
• Power Dissipation: 5000W
• Package: R-6

MM1ZB27 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 27V
• Minimum Zener voltage : 26.46V
• Maximum Zener voltage : 27.54V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

0.12μF 124K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.2mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.056μF 563J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 24.0mm(W)
• Dimensions = 18.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

HER206 600V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 600V
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 70ns
• Package : DO-15

MM1Z6B2 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 6.2V
• Minimum Zener voltage : 6.076V
• Maximum Zener voltage : 6.324V
• Maximum Reverse Current : 1.0µa
• Package : SOD-123

74HC86 Quad 2-Input EXOR Gate SMD IC

Specification:-

• Type: Quad
• Number of: 14 Pins
• Mounting: SMD
• Material: Plastic
• Supply Voltage: 2 to 6V
• Low Noise: VOLP = 0.8 V (Max)

IR2110 High and Low Side Driver SMD IC

Specification:-

• High-side floating supply voltage: -0.3 to 525 V
• High-side floating supply offset voltage: VB -25 to VB +0.3 V
• High-side floating output voltage: VS -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25 V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply voltage: -0.3 to VSS+25 V

IRFP264N 250V 44A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: P-Channel
• Drain-Source Breakdown Voltage (Vds): 250V
• Continuous Drain Current (Id): 44A
• Drain-Source Resistance (Rds On): 0.06 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 210 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 380W