ALL ELECTRONICS COMPONENTS

1K ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 5000

Specification:-

• Case type: 0603
• Resistance: 1K
• Tolerance :  ± 5%
• Power Rating (Watt) : 0.25W, 1/4W
• Operating Temperature : -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

INA114 Precision Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Packages: 8-Pin
• Low offset voltage: 50µv max
• Low drift: 0.25µv/°C max
• Low input bias current: 2na max
• High common-mode rejection: 115db min
• Input over-voltage protection: ±40V
• Wide supply range: ±2.25 to ±18V
• Low quiescent current: 3ma max

IRF1407 75V 130A N-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 75V
• Continuous Drain Current (Id): 130A
• Drain-Source Resistance (Rds On): 7.8mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 250 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 330W

1.5KE8.2A 200µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 7.79V
2. Maximum Breakdown voltage: 8.61V
3. Maximum Reverse Leakage Current: 200µa
4. Maximum peak pulse current: 124A
5. Maximum clamping voltage: 12.1V
6. Maximum Temperature Coefficient of VBR: 0.065%
7. Power Dissipation: 1500W
8. Package: DO-201AD

0.015μF 153J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 5.0mm
8. Dimensions of Length : 13.0mm

0.33μF 334J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 10.2mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

SMC(G) SMCJ40A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 40.0V
3. Maximum peak pulse current : 23.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 64.5V
6. Power dissipation : 1500W

0.082μF 823J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 24.0mm(W)
• Dimensions = 19.0mm(H)
• Dimensions = 12.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMA(G), ER2E 300V Surface Mount Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA(G) 
2. Maximum respective peak reverse voltage : 300v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.25V

UF1M 1000V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMA(G)
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 1.0A
4. Forward peak surge current@8.3ms single half sine-wave : 30A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 75ns

GBJ4, GBJ402 4A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ4
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 4.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 120A
6. Maxim forward voltage : 1.1V

WOB, RB151 1.5A 50V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : WOB
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 1.5A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.0V