ALL ELECTRONICS COMPONENTS

GBJ6, GBJ25005 25A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Maxim forward voltage : 1.1V

BZT52C24 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 24V
• Minimum Zener voltage : 22.8V
• Maximum Zener voltage : 25.6V
• Maximum Reverse Leakage Current : 0.1µa
• Package : SOD-123

270uf / 200V Aluminum Electrolytic Capacitors (25 x 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x 25mm
4. Voltage Rating :  200V
5. Capacitance: 270uf
6. Capacitance tolerance : ±20%(M)

74LS74 Dual D-type Positive Edge-triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current: -0.4mA
• Output Current: 8mA
• Operating Temperature: 0°C to 70°C

OP484 Precision Rail-to-Rail Input and Output Operational Amplifier SMD IC

Specification:-

• IC Name: OP484
• Wide bandwidth: 4 MHz
• Low offset voltage: 65 μV
• Unity-gain stable
• High slew rate: 4.0 V/μs
• Low noise: 3.9 nV/√Hz

MAX3232 RS-232 Transceivers SMD IC

Specification:-

• Mounting Type: Surface Mount
• Operating Voltage: 3V to 5.5V
• Input Levels: ±30-V
• Operating current: 8mA
• Can work with 5V and 3.3V logic devices
• TTL/CMOS to RS232 Converter IC

0.0027μF 272K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 5.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

CD4068 CMOS 8-Input NAND/AND Gate IC (DIP-14 Package)

Specification:-

• High Voltage Type (20V Rating)
• Medium Speed Operation – TPHL, TPLH = 75ns (Typ.) at VDD = 10V
• 5V, 10V and 15V Parametric Ratings
• Maximum Input Current of 1µA at 18V
• Temperature Range; 100nA at 18V and +25°C
• Noise Margin (Over Full Package/Temperature Range) – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V

0.056μF 563J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

0.0056μF 562J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

8K bit Serial I2C Bus EEPROM IC DIP-8 Package (24C08)

Specification:-

• Single supply with operation: 4.5-5.5V
• All inputs and outputs VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• ESD protection on all pins: ≥ 4 kV
• Soldering temperature of leads (10 seconds): 300°C

SA7.0 150µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 7.78 , Max(V) 9.51
• Maximum peak current : 37.8A
• Maximum reverse leakage current @ VRWM : 150µA
• Power dissipation :500W
• Package : DO-15