ALL ELECTRONICS COMPONENTS

1N5400G 50V ,DO-21AD Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Maximum average rectified current : 3.0A
• Peak forward surge current 8.3ms single half sine- wave : 200A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-21AD

US2A 50V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMA/SMB
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 2.0A
4. Forward peak surge current@8.3ms single half sine-wave : 50A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 50ns

GNJ6, GBJ15005 15A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GNJ6
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 15.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 200A
6. Maxim forward voltage : 1.1V

74HC164 8-Bit Serial In/Parallel out Shift Register SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply voltage range: 2V to 6V
• Supply Voltage: − 0.5 to + 7.0V
• Typical propagation delay: 19 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -55°C to 150°C

74HC02 Quad 2-Input NOR Gate SMD IC

Specification:-

• Mounting: SMD
• Number of: 14 Pins
• Voltage Rating: 4.75 to 5.25V
• Storage Temperature Range: 0°C to + 70°C
• Large Operating Voltage Range
• Four Independent NOR Gates
• High-Speed CMOS Type

0.47 µF 0805 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 0805
• Capacitance : 0.47uf
• Tolerance :  ± 10%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

5KP100 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 111V
• Maximum Breakdown voltage: 136.0V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 28A
• Maximum clamping voltage: 179.0V
• Power Dissipation: 5000W
• Package: R-6

P4KE9.1A 50µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 8.65 , Max(V) 9.55
• Maximum peak current : 31A
• Maximum reverse leakage current @ VRRM : 50µA
• Package : DO-41

0.033μF 333J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 5.5mm
• Lmax = 16.5mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

0.033μF 333J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 8.5mm
8. Dimensions of Length : 20.5mm

SMBJ48 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 53.30V
3. Maximum Breakdown voltage : 65.1V
4. Stand-off voltage : 48.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 7.0A
7. Maximum clamping voltage : 85.5V
8. Power dissipation : 600W

SMBJ12A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 13.3V
3. Maximum Breakdown voltage : 14.7V
4. Stand-off voltage : 12.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 30.2A
7. Maximum clamping voltage : 19.9V
8. Power dissipation : 600W