ALL ELECTRONICS COMPONENTS

AD623 Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: 12 V
• Internal Power Dissipation: 650 mW
• Differential Input Voltage: ±6 V
• Output Short-Circuit Duration: Indefinite
• Storage Temperature Range: −65°C to +150°C
• Operating Temperature Range: −40°C to +85°C
• Lead Temperature Range: 300°C

P4KE91A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 86.5 , Max(V) 95.5
• Maximum peak current : 3.4A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

0.0012μF 122J 630V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 630V
• Dimensions = 16.0mm(W)
• Dimensions = 11.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

0.0047μF 472J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 14.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 7.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMC(G) SMCJ48 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 48.0V
3. Maximum peak pulse current : 17.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 85.5V
6. Power dissipation : 1500W

74LS10 Triple 3-Input NAND Gates SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -0.4mA
• Output Current (Low): 8mA
• Operating Temperature: 0°C to 70°C

A4988 Stepper Motor Driver SMD IC

Specification:-

• 3.3 and 5 V compatible logic supply
• Thermal shutdown circuitry
• Short-to-ground protection
• Shorted load protection
• Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16

P4KE27A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 25.7 , Max(V) 28.4
• Maximum peak current : 11.2A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

SMA, SMAJ11A, 11.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 11.0v
3. Maximum average rectified current : 16.5A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 18.2V

74LS193 Binary Up/Down Counter with Clear IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage: 4.5 to 5.5V
• Output Current: -0.4 to 8mA
• Temperature range: –55°C to +125°C
• High Speed 40 MHz Typical Count Frequency

INA125 Instrumentation Amplifier with Precision Voltage Reference SMD IC

Specification:-

• Supply Voltage: 36V
• Input Signal Voltage: ±40V
• Output Short Circuit: Continuous
• Operating Temperature: –55°C to +125°C
• Storage Temperature: –55°C to +125°C
• Lead Temperature DIP: +300°C
• Low Quiescent Current: 460µa
• Low Offset Drift: 2µv/°C Max

IR2111 Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic input Voltage: -0.3 to VSS+0.3 V