ALL ELECTRONICS COMPONENTS

0.1μF 104J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 15.0mm(W)
3. Dimensions = 11.0mm(H)
4. Dimensions = 7.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

HCNR201 High linearity analog optocouplers DIP 8 pin IC

Specification

1. Output type: Photodiode
2. Number of channels: 1
3. Isolation voltage: 5000 Vrms
4. If - Forward Current: 20 mA
5. Vf - Forward Voltage:  1.6 V
6. Power Dissipation: 60 mW

KA2206B 2.3W Dual audio power amplifier 14 pins IC pack of 50pcs

Specification

1. Supply voltage: 15V
2. Power dissipation: 4W
3. Operating supply voltage range: 9V to 11V
4. Quiescent circuit current : 40mA to 55mA
5. Closed loop voltage gain: 43dB to 47dB
6. Output power: 2.3W

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 10pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

1N5399 1.5A 50V to 100V Zener Diode Rectifier (Pack of 50)

specification:

•    High Current to Small Size
•    High Current Capability
•    Low Forward Voltage Drop
•    Low Leakage
•    High Reliability

A92 High voltage PNP transistor pack of 20pcs

Specifications:-

1. Transistor type  :  High Voltage PNP Transistor
2. Collector-Emitter voltage  :  300 V
3. Emitter base voltage  :  5V
4. Continuous collector current  :  500mA
5. Transition frequency  :  50MHz

SC458G B50K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 50KΩ
3. Total length of the pot: 75mm
4. Travel length: 60mm
5. Power rating: 0.5W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

TDA2050 32 watt Audio power amplifier 5 pins IC pack of 50pcs

Specification

1. Low-frequency class A and B amplifier
2. Operating voltage :  -25V to +25V
3. Output :  28Watts with 4Ω speaker
4. Voltage gain:  80dB
5. Supply voltage rejection:  45dB
6. Output power: up to 50 watts
7. Short circuit and thermal protection

10 Inch Foam Speaker Gasket Black Color Pack of 5

Specification:-

• Material: Foam
• Color: Black
• Easy to install
• Heat insulation, Cold resistance, and Exposure
• Type: Speaker, Woofer

FPS 0204M7R1 OEM Flat Panel MCMA Planar Speaker 4 Ohm 8W

Specification:-

• Impedance value : 4Ω (ohm)
• Power rating: 8W
• Shape: Rectangle
• range output from 240 to 20,000 Hz.
• Extremely slim design.

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 10pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents