ALL ELECTRONICS COMPONENTS

SMA, SMAJ26, 26.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 26.0v
3. Maximum average rectified current : 6.4A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 46.6V

510k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 510k MR Ω ohm MF Through Hole Resistors Axial Lead Pack of 5000

Specifications:-

• Resistance: 510K ohm (Ω)
• Resistor type: carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

CD4543 BCD to 7 Segment Decoder IC (DIP-16 Package)

Specification:-

• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V 

SA51 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 56.7 , Max(V) 69.3
• Maximum peak current : 5.5A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P6KE47A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 44.7V
• Maximum Breakdown voltage: 49.4V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 9.3A
• Maximum clamping voltage: 64.8V
• Maximum Temperature Coefficient of VBR: 0.101%
• Power Dissipation: 600W
• Package: DO-15

SMAJ64 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 71.10V
3. Maximum Breakdown voltage : 86.4V
4. Stand-off voltage : 64.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 2.6A
7. Maximum clamping voltage : 114.0V
8. Power dissipation : 400W

SMBJ5.0 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 6.40V
3. Maximum Breakdown voltage : 7.81V
4. Stand-off voltage : 5.0
5. Maximum reverse leakage current : 800
6. Maximum peak pulse current : 62.5A
7. Maximum clamping voltage : 9.6V
8. Power dissipation : 600W

74LS10 Triple 3-Input NAND Gates SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -0.4mA
• Output Current (Low): 8mA
• Operating Temperature: 0°C to 70°C

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

Linear Slide Potentiometer 4x2mm Knob Red Color Fader Cap Pack of 5

Specification:-

• Color: Red 
• Knob Type: Slider
• Shaft Type: Shaft
• Easy to Install
• Shaft Fixing: Push-Fit
• Total Size: 23.5 × 11 × 10 mm

5KP20A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 22.2V
• Maximum Breakdown voltage: 24.5V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 154A
• Maximum clamping voltage: 32.4V
• Power Dissipation: 5000W
• Package: R-6

SA10 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 11.1 , Max(V) 13.6
• Maximum peak current : 26.6A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15