ALL ELECTRONICS COMPONENTS

SMBJ15A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 16.7V
3. Maximum Breakdown voltage : 18.5V
4. Stand-off voltage : 15.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 24.6A
7. Maximum clamping voltage : 24.4V
8. Power dissipation : 600W

OP07 Ultralow Offset Voltage Operational Amplifier SMD IC

Specification:-

• IC Name: OP07 
• Supply Voltage: ±22V
• Input Voltage: ±22V
• Differential Input Voltage: ±30V
• Low noise: 0.6 μV p-p maximum
• Wide supply voltage range: ±3 V to ±18 V
• Storage Temperature Range: −65˚C to +150˚C

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

1.5KE39 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 35.1V
2. Maximum Breakdown voltage: 42.9V
3. Maximum Reverse Leakage Current: 5.0µa
4. Maximum peak pulse current: 26.5A
5. Maximum clamping voltage: 56.4V
6. Maximum Temperature Coefficient of VBR: 0.100%
7. Power Dissipation: 1500W
8. Package: DO-201AD

SA100 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 111 , Max(V) 136.0
• Maximum peak current : 2.8
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE120 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 108.0 , Max(V) 132.0
• Maximum peak current : 2.4A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

0.0068μF 682J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 14.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 7.0mm(T)
• Dimensions = 7.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

0.10μF 104J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 8.5mm
8. Dimensions of Length : 16.5mm

SMBJ8.5A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 9.44V
3. Maximum Breakdown voltage : 10.4V
4. Stand-off voltage : 8.5
5. Maximum reverse leakage current : 10
6. Maximum peak pulse current : 41.7A
7. Maximum clamping voltage : 14.4V
8. Power dissipation : 600W

1.5KE10 10µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 9.00V
2. Maximum Breakdown voltage: 11.0V
3. Maximum Reverse Leakage Current: 10µa
4. Maximum peak pulse current: 100A
5. Maximum clamping voltage: 15.0V
6. Maximum Temperature Coefficient of VBR: 0.073%
7. Power Dissipation: 1500W
8. Package: DO-201AD

SA10A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 11.1 , Max(V) 12.3
• Maximum peak current : 29.4A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

SA6.5A 400µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 7.22 , Max(V) 7.98 
• Maximum peak current : 44.7A
• Maximum reverse leakage current @ VRWM : 400µA
• Power dissipation :500W
• Package : DO-15