ALL ELECTRONICS COMPONENTS

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

13.56MHz RFID Keychain Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency:  13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Blue
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

SA150A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 167 , Max(V) 185.0
• Maximum peak current : 2.1
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE150A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 143.0 , Max(V) 158.0
• Maximum peak current : 2.0A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

P6KE6.8A 1000µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:

• Minimum Breakdown voltage: 6.45V
• Maximum Breakdown voltage: 7.14V
• Maximum Reverse Leakage Current: 1000µa
• Maximum peak pulse current: 57A
• Maximum clamping voltage: 10.5V
• Maximum Temperature Coefficient of VBR: 0.057%
• Power Dissipation: 600W
• Package : DO-15

SA51A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 56.7 , Max(V) 62.7
• Maximum peak current : 6.1A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

0.0018μF 182J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 14.0mm(W)
• Dimensions = 11.0mm(H)
• Dimensions = 7.0mm(T)
• Dimensions = 7.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMBJ22 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 24.4V
3. Maximum Breakdown voltage : 29.8V
4. Stand-off voltage : 22.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 15.2A
7. Maximum clamping voltage : 39.4V
8. Power dissipation : 600W

1.5KE9.1A 50µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 8.65V
2. Maximum Breakdown voltage: 9.55V
3. Maximum Reverse Leakage Current: 50µa
4. Maximum peak pulse current: 112A
5. Maximum clamping voltage: 13.4V
6. Maximum Temperature Coefficient of VBR: 0.068%
7. Power Dissipation: 1500W
8. Package: DO-201AD

P6KE200A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 190.0V
• Maximum Breakdown voltage: 210.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 2.2A
• Maximum clamping voltage: 274.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 600W
• Package: DO-15

MBRB20H100CT 100V 10A Surface Mount Array 1-Pair Common Cathode Diodes Rectifier TO-263-3 (2 Leads + Tab) / D2PAK Pack of 100

Specification:-

• Package: TO-263-3 (2 Leads + Tab)  / D2PAK
• Forward Current: 10 A
• Repetitive Reverse Voltage: 100 V
• Forward Voltage: 880 mV
• Forward Surge Current: 250 A
• Reverse Current: 6 mA

BY254G 800V ,DO-201AD Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 800V
• Maximum average rectified current : 3.0A
• Peak forward surge current 8.3ms single half sine- wave : 150A
• Maximum reverse current @ VRRM TA = 25°C : 10µA 
• Package : DO-201AD