ALL ELECTRONICS COMPONENTS

1.5KE160A 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 152.0V
• Maximum Breakdown voltage: 168.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 6.8A
• Maximum clamping voltage: 219.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

0.0033μF 332J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 11.0mm(W)
• Dimensions = 11.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMBJ11 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 12.2V
3. Maximum Breakdown voltage : 14.9V
4. Stand-off voltage : 11.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 29.9A
7. Maximum clamping voltage : 20.1V
8. Power dissipation : 600W

P6KE130A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 124.0V
• Maximum Breakdown voltage: 137.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 3.3A
• Maximum clamping voltage: 179.0V
• Maximum Temperature Coefficient of VBR: 0.107%
• Power Dissipation: 600W
• Package: DO-15

0.0056μF 562J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 17.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMC(G) SMCJ30 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 30.0V
3. Maximum peak pulse current : 28.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 53.5V
6. Power dissipation : 1500W

SMA, SMAJ20, 20.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 20.0v
3. Maximum average rectified current : 8.4A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 35.8V

MM3Z5234B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 6.2V
• Minimum Zener voltage : 5.89V
• Maximum Zener voltage : 6.51V
• Maximum Reverse Current : 5µa
• Package : SOD-323

74LS93 5V 4Bit Binary Counter 14-Pin DIP

Specification:-

• Number of pins: 14
• 4-Bit Binary Counter IC
• Typical Operating Voltage: 5V
• Operating Voltage Range: 4.5V to 5.5V
• Output High Voltage: 3.5V
• Output Low Voltage: 0.25V
• Output current when high: -0.4mA
• Output current when low: 8mA

8K bit Serial I2C Bus EEPROM IC DIP-8 Package (24C08)

Specification:-

• Single supply with operation: 4.5-5.5V
• All inputs and outputs VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• ESD protection on all pins: ≥ 4 kV
• Soldering temperature of leads (10 seconds): 300°C

LMC660 CMOS Quad Operational Amplifier SMD IC

Specification:-

• Slew Rate: 1.1 V/μs
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Ultra Low Input Bias Current: 2 fA
• Low Distortion: 0.01% at 10 kHz
• Operating Range from +5V to +15.5V Supply

1.5KE16 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 14.4V
• Maximum Breakdown voltage: 17.6V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 64.0A
• Maximum clamping voltage: 23.5V
• Maximum Temperature Coefficient of VBR: 0.086%
• Power Dissipation: 1500W
• Package: DO-201AD