ALL ELECTRONICS COMPONENTS

0.0033μF 332J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 11.0mm(W)
• Dimensions = 11.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMA, SMAJ33, 33.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 33.0v
3. Maximum average rectified current : 5.1A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 59.0V

AM29F400BB90SI FLASH - NOR Memory IC 4Mbit Parallel 90ns 44-SOIC

Specification:-

• Memory Size: 4Mbit (512K x 8-bit / 256K x 16-bit)
• Access Time: 90ns
• Technology: CMOS
• Package: 44-pin SOIC
• Operating Voltage: Typically 3.0V to 3.6V
• Power Consumption: Low power consumption due to CMOS technology
• Operating Temperature Range: Typically -40°C to 85°C

3.5mm x 6mm x 0.8mm Axial Lead Ferrite Beads Inductors Pack of 2000

Specification:-

• Material: Metal
• Color: Black, Silver Tone
• Body Size: 3.5 x 6mm
• Lead Dia: 0.8mm/0.031
• Total Length: 62mm

1.5KE120 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 108.0V
• Maximum Breakdown voltage: 132.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 8.7A
• Maximum clamping voltage: 173.0V
• Maximum Temperature Coefficient of VBR: 0.107%
• Power Dissipation: 1500W
• Package: DO-201AD

SMBJ26 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 28.9V
3. Maximum Breakdown voltage : 35.3V
4. Stand-off voltage : 26.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 12.9A
7. Maximum clamping voltage : 46.6V
8. Power dissipation : 600W

SMBJ8.0 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 8.89V
3. Maximum Breakdown voltage : 10.9V
4. Stand-off voltage : 8.0
5. Maximum reverse leakage current : 50
6. Maximum peak pulse current : 40.0A
7. Maximum clamping voltage : 15.0V
8. Power dissipation : 600W

MM1Z5240B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 10V
• Minimum Zener voltage : 9.5V
• Maximum Zener voltage : 10.5V
• Maximum Reverse Current : 3µa
• Package : SOD-123

MCP2515 CAN Controller Interface IC (DIP-18 Package)

Specification:-

• Wide operating voltage: 2.7V to 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VDD +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temp. with power applied: 65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• Operating temperature range: -40°C to +125°C

LMC660 CMOS Quad Operational Amplifier SMD IC

Specification:-

• Slew Rate: 1.1 V/μs
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Ultra Low Input Bias Current: 2 fA
• Low Distortion: 0.01% at 10 kHz
• Operating Range from +5V to +15.5V Supply

SR150S/SB150S 50V ,A-405 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 40A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : A-405

SMC(G) SMCJ60A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 15.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 96V
6. Power dissipation : 1500W