ALL ELECTRONICS COMPONENTS

MM1Z5240B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 10V
• Minimum Zener voltage : 9.5V
• Maximum Zener voltage : 10.5V
• Maximum Reverse Current : 3µa
• Package : SOD-123

LMC660 CMOS Quad Operational Amplifier SMD IC

Specification:-

• Slew Rate: 1.1 V/μs
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Ultra Low Input Bias Current: 2 fA
• Low Distortion: 0.01% at 10 kHz
• Operating Range from +5V to +15.5V Supply

SMC(G) SMCJ36 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 36.0V
3. Maximum peak pulse current : 23.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 64.3V
6. Power dissipation : 1500W

SMA, SMAJ24, 24.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 24.0v
3. Maximum average rectified current : 7.0A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 43.0V

SMBJ17A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 18.9V
3. Maximum Breakdown voltage : 20.9V
4. Stand-off voltage : 17.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 21.7A
7. Maximum clamping voltage : 27.6V
8. Power dissipation : 600W

SMBJ8.0 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 8.89V
3. Maximum Breakdown voltage : 10.9V
4. Stand-off voltage : 8.0
5. Maximum reverse leakage current : 50
6. Maximum peak pulse current : 40.0A
7. Maximum clamping voltage : 15.0V
8. Power dissipation : 600W

0.056μF 563J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

SMC(G) SMCJ60A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 15.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 96V
6. Power dissipation : 1500W

SMA, SMAJ13A, 13.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 13.0v
3. Maximum average rectified current : 14.0A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 21.5V

100 ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 100 ohm
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

74HC244 Octal Buffer/Line Driver with Tri-State Output SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 7V
• Input Voltage: 7V
• Typical propagation delay: 12 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -65°C to 150°C
• Typical IOL (sink current) 24 mA
• Typical IOH (source current) −15 mA

1.5KE6.8 1000µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 6.12V
2. Maximum Breakdown voltage: 7.48V
3. Maximum Reverse Leakage Current: 1000µa
4. Maximum peak pulse current: 139A
5. Maximum clamping voltage: 10.8V
6. Maximum Temperature Coefficient of VBR: 0.057%
7. Power Dissipation: 1500W
8. Package: DO-201AD