ALL ELECTRONICS COMPONENTS

74HC244 Octal Buffer/Line Driver with Tri-State Output SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 7V
• Input Voltage: 7V
• Typical propagation delay: 12 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -65°C to 150°C
• Typical IOL (sink current) 24 mA
• Typical IOH (source current) −15 mA

LMC660 CMOS Quad Operational Amplifier SMD IC

Specification:-

• Slew Rate: 1.1 V/μs
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Ultra Low Input Bias Current: 2 fA
• Low Distortion: 0.01% at 10 kHz
• Operating Range from +5V to +15.5V Supply

SA90 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 100 , Max(V) 122.0
• Maximum peak current : 3.1
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

SR150S/SB150S 50V ,A-405 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 40A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : A-405

SMC(G) SMCJ36 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 36.0V
3. Maximum peak pulse current : 23.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 64.3V
6. Power dissipation : 1500W

SMA, SMAJ24, 24.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 24.0v
3. Maximum average rectified current : 7.0A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 43.0V

SMBJ26 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 28.9V
3. Maximum Breakdown voltage : 35.3V
4. Stand-off voltage : 26.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 12.9A
7. Maximum clamping voltage : 46.6V
8. Power dissipation : 600W

SMBJ8.0 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 8.89V
3. Maximum Breakdown voltage : 10.9V
4. Stand-off voltage : 8.0
5. Maximum reverse leakage current : 50
6. Maximum peak pulse current : 40.0A
7. Maximum clamping voltage : 15.0V
8. Power dissipation : 600W

MM1Z5240B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 10V
• Minimum Zener voltage : 9.5V
• Maximum Zener voltage : 10.5V
• Maximum Reverse Current : 3µa
• Package : SOD-123

AD623 Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: 12 V
• Internal Power Dissipation: 650 mW
• Differential Input Voltage: ±6 V
• Output Short-Circuit Duration: Indefinite
• Storage Temperature Range: −65°C to +150°C
• Operating Temperature Range: −40°C to +85°C
• Lead Temperature Range: 300°C

1.5KE6.8 1000µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 6.12V
2. Maximum Breakdown voltage: 7.48V
3. Maximum Reverse Leakage Current: 1000µa
4. Maximum peak pulse current: 139A
5. Maximum clamping voltage: 10.8V
6. Maximum Temperature Coefficient of VBR: 0.057%
7. Power Dissipation: 1500W
8. Package: DO-201AD

0.056μF 563J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω