ALL ELECTRONICS COMPONENTS

1.5KE220A 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 209.0V
• Maximum Breakdown voltage: 231.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 4.6A
• Maximum clamping voltage: 328.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

0.0068μF 682J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 6.0mm
8. Dimensions of Length : 16.5mm

SMBJ13 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 14.4V
3. Maximum Breakdown voltage : 17.6V
4. Stand-off voltage : 13.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 25.2A
7. Maximum clamping voltage : 23.8V
8. Power dissipation : 600W

P80NF55 55V 80A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 80A
• Drain-Source Resistance (Rds On): 8Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 155 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 300W

5KP30 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 33.3V
• Maximum Breakdown voltage: 40.7V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 93A
• Maximum clamping voltage: 53.5V
• Power Dissipation: 5000W
• Package: R-6

SA17 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 18.9 , Max(V) 23.1
• Maximum peak current : 16.4A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE62 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 55.8 , Max(V) 66.8
• Maximum peak current : 4.7A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

SMC(G) SMCJ22A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 22.0V
3. Maximum peak pulse current : 42.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 35.5V
6. Power dissipation : 1500W

SMBJ70A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 77.80V
3. Maximum Breakdown voltage : 86.0V
4. Stand-off voltage : 70.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 5.3A
7. Maximum clamping voltage : 113.0V
8. Power dissipation : 600W

BZT52C8V2S 200mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 200mW
• Nominal Zener Voltage : 8.2V
• Minimum Zener voltage : 7.7V
• Maximum Zener voltage : 8.7V
• Maximum Reverse Current : 0.7µa
• Package : SOD-323

LMC660 CMOS Quad Operational Amplifier SMD IC

Specification:-

• Slew Rate: 1.1 V/μs
• Specified for 2 kΩ and 600Ω Loads
• High Voltage Gain: 126 dB
• Low Input Offset Voltage: 3 mV
• Ultra Low Input Bias Current: 2 fA
• Low Distortion: 0.01% at 10 kHz
• Operating Range from +5V to +15.5V Supply

SA90 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 100 , Max(V) 122.0
• Maximum peak current : 3.1
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15