ALL ELECTRONICS COMPONENTS

P6KE62A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 58.9V
• Maximum Breakdown voltage: 65.1V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 7.1A
• Maximum clamping voltage: 85.0V
• Maximum Temperature Coefficient of VBR: 0.104%
• Power Dissipation: 600W
• Package: DO-15

HER155 400V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 400V
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : DO-15

MM3ZB39 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 39V
• Minimum Zener voltage : 38.22V
• Maximum Zener voltage : 39.78V
• Maximum Reverse Current : 2.0µa
• Package : SOD-323

CD4543 BCD to 7 Segment Decoder IC (DIP-16 Package)

Specification:-

• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V 

5KP14 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 15.6V
• Maximum Breakdown voltage: 19.1V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 194A
• Maximum clamping voltage: 25.8V
• Power Dissipation: 5000W
• Package: R-6

0.022μF 223J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMBJ20 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 22.2V
3. Maximum Breakdown voltage : 27.1V
4. Stand-off voltage : 20.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 16.8A
7. Maximum clamping voltage : 35.8V
8. Power dissipation : 600W

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

P6KE120A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 114.0V
• Maximum Breakdown voltage: 126.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 3.6A
• Maximum clamping voltage: 165.0V
• Maximum Temperature Coefficient of VBR: 0.107%
• Power Dissipation: 600W
• Package: DO-15

SMC(G) SMCJ78 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 78.0V
3. Maximum peak pulse current : 10.8A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 139V
6. Power dissipation : 1500W

IR2104 Half Bridge Driver SMD IC

Specification:-

• 3.3V, 5V and 15V input logic compatible
• Gate drive supply range from 10 to 20V
• High side output in phase with input
• Shut down input turns off both channels
• Undervoltage lockout

5KP110 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 122V
• Maximum Breakdown voltage: 149.0V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 26A
• Maximum clamping voltage: 196.0V
• Power Dissipation: 5000W
• Package: R-6