ALL ELECTRONICS COMPONENTS

SMBJ75 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 83.30V
3. Maximum Breakdown voltage : 102V
4. Stand-off voltage : 75.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.5A
7. Maximum clamping voltage : 134.0V
8. Power dissipation : 600W

IRFP240 200V 20A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): -200V
• Continuous Drain Current (Id): 20A
• Drain-Source Resistance (Rds On): 0.18 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 70 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 150W

MM3Z5236B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 7.5V
• Minimum Zener voltage : 7.13V
• Maximum Zener voltage : 7.88V
• Maximum Reverse Current : 3µa
• Package : SOD-323

1.3R ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 5000

Specification:-

• Case type: 0603
• Resistance: 1.3R
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type : Thick film chip
• Operating voltage range: 180V to 220V

74HC109 Dual J-K Positive-Edge-Triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Input Clamping Current: ±20 mA
• Output Clamping Current: ±20 mA
• J and K inputs for easy D-type flip-flop
• Storage Temperature Range : −65°C to + 150°C

CD4016 Quad Bilateral Switch IC (DIP-14 Package)

Specification:-

• Wide supply voltage range: 3V to 15V
• VDD Supply Voltage: −0.5V to +18V
• VIN Input Voltage: −0.5V to VDD + 0.5V
• TS Storage Temperature Range: −65°C to + 150°C
• Power Dissipation: Dual-In-Line: 700 mW
• Frequency response, switch “ON”: 40 MHz (typ.)
• Lead Temperature: 260°C

MM3Z5250B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 20V
• Minimum Zener voltage : 19V
• Maximum Zener voltage : 21V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

3.3k ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 3.3M
• Tolerance:  ± 1%
• Power Rating (Watt): 1/16W
• Resistor Technology: Thick Film
• Operating Temperature: -55 °C to +155 °C

HER156 600V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 600V
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 70ns
• Package : DO-15

LF398 Sample and Hold Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: ±18 V
• Input voltage: ±18 V
• Power dissipation: 500 m W
• Operates from ±5-V to ±18-V Supplies
•  0.5-mV Typical Hold Step at Ch = 0.01 µF
• Logic-to-logic reference differential voltage: 7 to -30 V
• Storage temperature: -65 °C to 150 °C

SM72295 Photovoltaic Full Bridge Driver SMD IC

Specification:-

• Dual Half Bridge MOSFET Drivers
• Integrated 100V bootstrap diodes
• Supply Voltage Range up to 115V DC
• Max. Junction Temperature: 150°C
• Temperature Range: -55°C to +150°C

0.0033μF 332J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 5.0mm
8. Dimensions of Length : 13.0mm