ALL ELECTRONICS COMPONENTS

SMAJ51A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 56.70V
3. Maximum Breakdown voltage : 62.7V
4. Stand-off voltage : 51.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.6A
7. Maximum clamping voltage : 82.4V
8. Power dissipation : 400W

IRF1405 55V 169A N-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 169A
• Drain-Source Resistance (Rds On): 5.3mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 260 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 330W

22uF 100V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 22uF
• Rated Voltage: 100V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

IRFB4321 150V 85A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 150V
• Continuous Drain Current (Id): 85A
• Drain-Source Resistance (Rds On): 15mOhms
• Gate-Source Voltage (Vgs): 30V
• Gate Charge (Qg): 110 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 350W

SMBJ70 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 77.80V
3. Maximum Breakdown voltage : 95.1V
4. Stand-off voltage : 70.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.8A
7. Maximum clamping voltage : 125.0V
8. Power dissipation : 600W

5KP7.5 250µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 8.33V
• Maximum Breakdown voltage: 10.2V
• Maximum Reverse Leakage Current: 250µa
• Maximum peak pulse current: 350A
• Maximum clamping voltage: 14.3V
• Power Dissipation: 5000W
• Package: R-6

AM26LV32 Low-Voltage High-Speed Quadruple Differential Line Receiver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Input Hysteresis: 50 mV Typical
• Operates From Single 3.3-V Supply
• Ultra-Low Power Dissipation: 27 mW Typical
• Switching Rates Up to 32 MHz
• 235 mW With Four Receivers at 32 MHz

470uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 470uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

SMAJ78 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 86.70V
3. Maximum Breakdown voltage : 106V
4. Stand-off voltage : 78.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 2.2A
7. Maximum clamping voltage : 139.0V
8. Power dissipation : 400W

AD736 True RMS to DC Converter IC

Specification:-

• Supply Voltage: ±16.5 V
• Internal Power Dissipation: 200 mW
• Input Voltage: ±VS
• Output Short-Circuit Duration: Indefinite
• Differential Input Voltage: +VS and –VS
• Lead Temperature: 300°C
• Storage Temperature Range: −65°C to +125°C
• Wide power supply range: +2.8 V, −3.2 V to ±16.5 V

DG508 CMOS Analog Multiplexer IC

Specification:-

• Low power – SUPPLY: 10 μA
• Low charge injection – QINJ = 2 pC
• Voltages Referenced to V-: V+, GND: 44, 25V
• Current (Any terminal): 30mA
• Power Dissipation: 510 mW
• Storage Temperature: -65°C to +150°C
• Extended operate temperature range: -40 °C to +125 °C

LF351 Wide Bandwidth JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage Never to be Crossed: +/-18V
• Power Dissipation without Heatsink applied: 670 mW
• Differential Input Voltage: +/-30V
• Supply Voltage Range on Input Pin: +/-15V
• High Slew Rate 13 V/µs Typical
• Storage Temperature Range: -65° C to +150° C
• Storage temperature: 0 °C to 70 °C