ALL ELECTRONICS COMPONENTS

24C32 32K bit Serial I2C Bus EEPROM IC (DIP-8 Package)

Specification:-

• Voltage operating range: 4.5V to 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• ESD protection on all pins: ≥ 4 kV
• Soldering temperature of leads (10 seconds): 300°C

1uF 0402 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 0402
• Capacitance : 1uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

LF351 Wide Bandwidth JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage Never to be Crossed: +/-18V
• Power Dissipation without Heatsink applied: 670 mW
• Differential Input Voltage: +/-30V
• Supply Voltage Range on Input Pin: +/-15V
• High Slew Rate 13 V/µs Typical
• Storage Temperature Range: -65° C to +150° C
• Storage temperature: 0 °C to 70 °C

1uF 50V 0805 SMD Ceramic Capacitor Pack of 3000

Specification:-

• Part no: CC0805KKX7R9BB105
• Capacitance: 1 uF
• Mounting Type: SMD
• Tolerance Rating: ±10 %
• Voltage Rating:  50 V
• Material: Ceramic

MCP41010 8-Bit Digital 10K Potentiometer with SPI Interface IC

Specification:-

• Single supply operation: 2.7V – 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VDD +1.0V
• Storage temperature: -60°C to +150°C
• Ambient temp. with power applied: -60°C to +125°C
• ESD protection on all pins: ≥ 2 kV

470uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 470uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

2SK1118 600V 6A N-Channel Power MOSFET (TO-220F Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 600V
• Continuous Drain Current (Id): 6A
• Drain-Source Resistance (Rds On): 1.25 Ohms
• Gate-Source Voltage (Vgs): 3.5V
• Operating Temperature Range: -55 to 150°C
• Power Dissipation (Pd): 45W

2SK962 900V 8A N-Channel Silicon Power MOSFET (TO-3P Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 900V
• Continuous Drain Current (Id): 8A
• Drain-Source Resistance (Rds On): 20Ohms
• Gate-Source Voltage (Vgs): 20V
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 150W

MC34152P MC34152 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C

5KP12 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 13.3V
• Maximum Breakdown voltage: 16.3V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 227A
• Maximum clamping voltage: 22.0V
• Power Dissipation: 5000W
• Package: R-6

SMBJ110 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 122.00V
3. Maximum Breakdown voltage : 149V
4. Stand-off voltage : 110.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.1A
7. Maximum clamping voltage : 196.0V
8. Power dissipation : 600W

74HC574 Tri State Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C