ALL ELECTRONICS COMPONENTS

22uF 50V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 22uF
• Rated Voltage: 50V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

IR1150S ONE Cycle Control PFC SMD IC

Specification:-

• Programmable switching frequency (50kHz-200kHz)
• Fast 1.5A peak gate drive
• Internally clamped 13V gate drive
• Micropower startup (<200 µA)
• Min. off time of 150-350ns over freq range
• Cycle-by-cycle peak current limit

10uF 1210 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1210
• Capacitance : 10uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

74HC541 Octal 3-State Buffer/Line Driver SMD IC

Specification:-

• Mounting: SMD
• Input level: CMOS level
• Supply Voltage: 2 to 6V
• Output Current: ± 35 mA
• Supply Voltage: − 0.5 to + 7.0V
• Operating Temperature: 65°C to 150°C

20mm 820V 6.5 kA 1-Circuit Through Hole Varistor (MOV - S20K510) Pack of 5

Specification:-

• Package / Case: Disc 20mm
• Current-Surge: 6.5kA
• Varistor Voltage: 820V
• Maximum AC Volts: 510VAC
• Maximum DC Volts: 670VDC

IR2111 Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic input Voltage: -0.3 to VSS+0.3 V

MCP2551 CAN Transceiver IC (DIP-8 Package)

Specification:-

• DC Voltage at TXD, RXD. VREF and Vs: -0.3V to VDD +0.3V
• DC Voltage at CANH, CANL: -42V to 42V
• Transient Voltage on Pins 6 and 7: -250V to 250V
• Storage temperature: -55°C to +150°C
• Operating Temperature: -40°C to +125°C
• Virtual Junction Temperature: -40°C to +150°C

DF06S Single Phase 600V Surface Mount Bridge Rectifier

Specification:-

• Package: SMD4 Gull Wing / DF-S
• No. of Pins: 4 pins
• No. of Phases: Single Phase
• Transistor Mounting: Surface Mount
• Average Forward Current: 1A
• Forward Surge Current: 50A
• Repetitive Peak Reverse Voltage: 600V

10uf 0805 50V (106) SMD Capacitor Pack of 50pcs

Specification:-

• Case type : 0805
• Capacitance : 10uf
• Tolerance :  ± 10%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

SMBJ85 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 94.40V
3. Maximum Breakdown voltage : 115V
4. Stand-off voltage : 85.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.0A
7. Maximum clamping voltage : 151.0V
8. Power dissipation : 600W

74595 8-Bit Serial-in/Serial or Parallel-Out Shift Register SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Voltage Rating: 2.0 to 6.0 V
• Supply Voltage: – 0.5 to + 7.0
• Input voltage: – 0.5 to VCC + 0.5
• Output Voltage: – 0.5 to VCC + 0.5
• Input Current: ±20 mA
• Storage Temperature Range: 0°C to + 70°C
• Output Drive Capability: 15 LSTTL Loads

CD4538 Dual Precision Monostable Multi Vibrator IC (DIP-16 Package)

Specification:-

• Part number: CD4538
• Wide supply voltage range 3.0V to 15V
• High noise immunity 0.45 VCC (typ.)
• DC Supply Voltage (VDD): −0.5V to +18VDC
• Input Voltage (VIN): −0.5V to VDD + 0.5VDC
• Power Dissipation (PD) Dual-In-Line: 700 mW
• Lead Temperature (TL): 260°C
• Storage Temperature Range (TS): −65°C to +150°C