ALL ELECTRONICS COMPONENTS

10uF 0402 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 0402
• Capacitance : 10uF 
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

MCP4821 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC (DIP-8 Package)

Specification:-

• Maximum Junction Temperature: 150°C
• Current at Input Pins: ±2 mA
• Current at Supply Pins: ±50 mA
• Current at Output Pins: ±25 mA
• All Inputs and Outputs: VSS – 0.3V to VDD + 0.3V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -55°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv

MM3Z5249B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 19V
• Minimum Zener voltage : 18.05V
• Maximum Zener voltage : 19.95V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

AT89C1051-24SC Microcontroller IC 8-Bit 24MHz 1KB (20-SOIC)

Specification:-

• Package: SOIC-20 (0.295", 7.50mm)
• No. of Pins: 20
• Speed: 24MHz
• Core Processor: 8051
• Program Memory Type: FLASH
• Program Memory Size: 1KB (1K x 8)
• Voltage Supply (Vcc/Vdd): 4V ~ 6V
• Mounting Type: Surface Mount

ADG3245BRUZ SMD Switch IC (Package 20-TSSOP)

Specification:-

• Part No: ADG3245BRUZ
• Package: TSSOP 20 (0.173", 4.40mm)
• Mounting Type: Surface Mount 
• No. of Pins: 20Pins
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.3 V
• Output Current: 25mA
• Operating Temperature: - 40°C to +85°C 
• Logic Type: Level Translator Bus Switch

ACPL-782T-000E Isolation Amplifier IC 8-PDIP

Specification:-

• Package: PDIP-8 (0.300", 7.62mm) 
• No. of Pins: 8-Pins
• Supply Voltage : 5.5 V
• Maximum Power Dissipation: 600 mW
• Number of Channels per Chip: 1 Channel
• Operating Temperature: -40°C ~ 125°C

22uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 22uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

P6KE39A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 37.1V
• Maximum Breakdown voltage: 41.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 11.2A
• Maximum clamping voltage: 53.9V
• Maximum Temperature Coefficient of VBR: 0.100%
• Power Dissipation: 600W
• Package: DO-15

74HC574 Tri State Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

MAX660 CMOS Monolithic Voltage Converter IC

Specification:-

• Supply Voltage (V+ to GND, or GND to OUT): +6V
• Storage Temperature Range: -65°to +160°C
• Lead Temperature: +300°C
• Frequency: 10kHz/80kHz
• Operating Temperature Ranges: 0°C to +70°C
• Continuous Power Dissipation: 727mW
• Output Short-Circuit Duration to GND: 1 sec
• OUT and V+ Continuous Output Current: 120mA

B1M Rotary 1M Ohm Plastic Shaft Linear Taper Single Row 3-Pin Potentiometer

Specification:-

• Type: Single-turn rotary potentiometer
• Resistance value: 1M
• Maximum Input Voltage:  200V dc
• Shaft : D-shaped shaft
• Rotational Life: 2000K cycles

SMAJ51 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 56.70V
3. Maximum Breakdown voltage : 69.3V
4. Stand-off voltage : 51.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.3A
7. Maximum clamping voltage : 91.1V
8. Power dissipation : 400W