ALL ELECTRONICS COMPONENTS

CD4511 BCD To 7 Segment Latch Decoder Driver IC (DIP-16 Package)

Specification:-

• Max. input current of 1 µA at 18 V
• 5-V, 10-V, and 15-V parametric ratings
• High-output-sourcing capability up to 25 mA
• 7-segment outputs blanked for BCD input codes > 1001

CD4072 Dual 4-Input OR Gate IC (DIP-14 Package)

Specification:-

• Voltage range: 3 to 18V
• 5-V, 10-V, and 15-V parametric ratings
• Maximum input current of 1 µA at 18 V
• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• Medium-Speed Operation – tPHL, tPLH = 75 ns (typ.) at VDD = 10 V

IR1150S ONE Cycle Control PFC SMD IC

Specification:-

• Programmable switching frequency (50kHz-200kHz)
• Fast 1.5A peak gate drive
• Internally clamped 13V gate drive
• Micropower startup (<200 µA)
• Min. off time of 150-350ns over freq range
• Cycle-by-cycle peak current limit

L6205 DMOS Dual Full Bridge Driver SMD IC

Specification:-

• Operating supply voltage from 8 to 52v
• 5.6a output peak current (2.8a dc)
• Rds(on) 0.3Ω typ. Value @ tj = 25 °c
• Operating frequency up to 100khz
• Non-dissipative overcurrent protection
• Paralleled operation

A4988 Stepper Motor Driver SMD IC

Specification:-

• 3.3 and 5 V compatible logic supply
• Thermal shutdown circuitry
• Short-to-ground protection
• Shorted load protection
• Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16

MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package

Specification:-

• Single supply operation: 2.7V – 5.5V
• 100ksps max. sampling rate at VDD = 5V
• 50ksps max. sampling rate at VDD = 2.7V
• Industrial temp range: -40°C to +85°C
• All Inputs and Outputs w.r.t. VSS: -0.6V to VDD +0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv

UC3844 Current Mode PWM Controller IC DIP-8

Specification:-

• Current-Mode PWM controller
• Operating Voltage: 12V to 28V
• Output pin current: 200 mA
• Switching Frequency: 500 kHz
• Duty Cycle - Max: 100 %
• Operating Supply Current:25 mA
• Optimized for Off-line and DC-to-DC Converters

MAX7219 8-Digit LED Display Driver SMD IC

Specification:-

• 24-Pin SO Package
• 10MHz Serial Interface
• 150µA Low-Power Shutdown (Data Retained)
• Decode/No-Decode Digit Selection
• Individual LED Segment Control

MAX485 RS-485/RS-422 Transceiver SMD IC

Specification:-

• Mounting Type: Surface Mount
• Number of Pin: 4
• Data Rate: 50Mbps
• Voltage - Supply: 1.71V ~ 1.89V, 2.25V ~ 5.5V
• Operating Temperature: -40°C ~ 125°C

MAX232 Serial Programming Driver/Receiver SMD IC

Specification:-

• Mounting Type: Surface Mount
• Supply Operation From +5V Supply
• No. Of RS-232 Drivers: 2
• No. Of RS-232 Receivers: 2
• Receivers Active In Shutdown: 0
• Integrated High ±15kV HBM ESD Protection

CA3161 IC + CA3162 IC Pair A/D Converter for 3 Digit Display DIP-16 Package

Specification:-

CA3161 IC

• DC V SUPPLY: +7.0 V
• Input Voltage: +5.5 V
• Output Voltage: +7 V
• Power Dissipation: 18mW (Typ)

CA3162 IC

• DC V SUPPLY: +7.0 V
• Input Voltage: +15 V
• Temperature Range: 0°C to 75°C
• Low Speed (4Hz) or High Speed (96Hz) Conversion Rate

MAX3232 RS-232 Transceivers SMD IC

Specification:-

• Mounting Type: Surface Mount
• Operating Voltage: 3V to 5.5V
• Input Levels: ±30-V
• Operating current: 8mA
• Can work with 5V and 3.3V logic devices
• TTL/CMOS to RS232 Converter IC