ALL ELECTRONICS COMPONENTS

BC817 500mA 45V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO):45V
2. Continuous Collector Current (IC):  500mA
3. Transition Frequency (fT):  250MHz
4. DC Current Gain (hFE):  100-600
5. Operating Temperature Range: -55 - 150°C
6. Transistor type  :  NPN Transistor

CD4052 4 Channel multiplexer and demultiplexer DIP 16 pin IC pack of 2pcs

Specification

1. Nominal voltage : 5V to 15V
2. Maximum operating voltage : 20V
3. Propagation delay : 400ns at 5V
4. Supports both analog and a digital voltage
5. 4:1 Multiplexer IC
6. 1:4 Demultiplexer IC

TSOP1738 Infrared receiver 3 pins (SM0038) pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. IR signal detection range  :  38khz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Low power consumption
6. Has in-built preamplifier
7. Package includes : 10 pieces

DK124 Power Management IC 24W DIP-8 Package

Specification:-

• Mounting: DIP
• Number of: 8 Pins
• 700V power transistor
• Power supply: 24W
• High-Speed Operation
• DIP-8 package configuration

LA3161 Dual channel stereo preamplifier SIP 8 pins IC pack of 10pcs

Specification

1. Dual-channel preamplifier
2. Type :  SIP
3. Number of pins : 8
4. Low noise
5. Supply voltage : 9V to 18V
6. Good ripple rejection
7. Power dissipation : 8mA

20 Pcs 150K Ohm (Ω) 1 Watt ±5% Tolerance 150K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 150K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

TO-92 TL431 (Vref-36) Power Supply Control IC Pack of 5pcs

Specification:-

• Adjustable output voltage: Vref to 36 V
• Sink-current capability: 1 mA to 100 mA
• Operation from −40°C to 125°C
• Low Output Noise

4.7μF 475J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V 
• Dimensions = 30.mm(W)
• Dimensions = 24.0mm(H)
• Dimensions = 16.0mm(T)
• Dimensions = 25.0mm(P)
• Standard  =  GB 7335 (IEC 384-2)
• Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
• Insulation Resistance = ≥ 1250S Ω 

1K ohm 1206 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 1206
2. Resistance : 1K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

6 x 4 inch (15.3cm x 10.3cm) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 6 x 4 inch (15.3cm x 10.3cm)
3. Board thickness : 1 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

CD4049 Hex inverter buffer and convertor DIP 16 pin IC pack of 2pcs

Specification

1. Input supply voltage range: 3V to 18V
2. Supply current: 50mA
3. Temperature range :  -40 to +85°C
4. Input capacitance : 22.5pf
5. Mostly used in voltage multiplier circuit
6. Accept high input supply voltage

0.1μF 104J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V 
2. Dimensions = 15.0mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 7.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≤7500M Ω