ALL ELECTRONICS COMPONENTS

20 Pcs 150K Ohm (Ω) 1 Watt ±5% Tolerance 150K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 150K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

1N4007 1A 1000V Inverse voltage rectifier diodes pack of 500pcs

Specifications

• Maximum Recurrent Peak Reverse Voltage 1000V
• Maximum RMS Voltage 700V
• Maximum DC Blocking Voltage 1000V
• Average Forward Current: 1.0A

TO-92 TL431 (Vref-36) Power Supply Control IC Pack of 5pcs

Specification:-

• Adjustable output voltage: Vref to 36 V
• Sink-current capability: 1 mA to 100 mA
• Operation from −40°C to 125°C
• Low Output Noise

1K ohm 1206 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 1206
2. Resistance : 1K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

5.6v 0.5 watt 1N4734A Zener diode ±5% voltage tolerance pack of 50pcs

Features:-

• Type: BZX55C5V6 ST
• Nominal Zener Voltage (VZ): 5.6V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 162mA

TO-92 LM317L, 3- Terminal adjustable output positive voltage regulator pack of 5pcs

Specification

1. Package: TO-92
2. Output Current Up To 1.5 A
3. Output Voltages 5 Volt Input Voltage 1.2V To 37V
4. Thermal Overload Protection Short Circuit Protection
5. 2 % Output Voltage Tolerance
6. Output Transition SOA Protection

SC6080GH A10K 75mm Single channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

6 x 4 inch (15.3cm x 10.3cm) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 6 x 4 inch (15.3cm x 10.3cm)
3. Board thickness : 1 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

4.7μF 475J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V 
• Dimensions = 30.mm(W)
• Dimensions = 24.0mm(H)
• Dimensions = 16.0mm(T)
• Dimensions = 25.0mm(P)
• Standard  =  GB 7335 (IEC 384-2)
• Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
• Insulation Resistance = ≥ 1250S Ω 

1.3cm x 1.5cm Aluminium heatsink for IC pack of 5pcs

Product overview:-

• 100% Branded, New, and High-Quality product
• Product Name : Aluminium Heatsink for IC
• The material used : Aluminium
• Color : Silver Tone
• Overall Size : 1.3cm x 1.5cm x 1.2cm (L*W*H)

5.1V 0.5watt 1N4733A Zener diode ±5% voltage tolerance pack of 50pcs

Features:-

• Type: BZX55C5V1 ST
• Nominal Zener Voltage (VZ): 5.1V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 178mA

22K Rotary potentiometer D shape shaft handle 3 pin pack of 2pcs

Specification

1. Type : Single-turn rotary potentiometer
2. Resistance value: 22K
3. Power rating : 0.3W
4. Shaft : 7 mm D shape shaft
5. Maximum Input Voltage  :  200Vdc
6. Rotational Life :  2000K cycles