ALL ELECTRONICS COMPONENTS

IR Remote Control Extension Cord Cable IR Receiver to USB Repeater Set-Top Box

Specification:-

• Operating power: 5VDC 0.2A
• Cable length: 200 cm (2 Meters)
• Cable color: Black
• Compatible Devices: Set Top Box
• Connectivity Technology: Usb, Infrared

200 ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 200 ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

2M ohm ( Ω ) single turn trimpot variable resistor 3386P-1-205LF pack of 5pcs

Specifications:-

1. Type: Single-turn variable resistor
2. Resistance value: 2M Ω
3. Power rating: 300V
4. Temperature Range: -55 °C to +125 °C
5. Rotational cycle: 200 cycles

LM311 Differential comparator op-amp DIP 8 pins IC pack of 50pcs

Specification

1. Wide power supply Range
   1. Singe supply :  5V to 30V
   2. Dual supply : ±2.5V to ±15V
2. Maximum current : 7.5mA
3. Single supply for two op-amps enables reliable operation
4. Capable of driving load up to 50V and 50 mA

Electronic Spices 50Pcs 4.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 4.7K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

2N7000 60V 200mA N-channel Power Mosfets pack of 20pcs

Specifications

1. Transistor polarity : N-channel
2. Drain source voltage Vds : 60V
3. Continuous drain current : 200mA
4. Mounting : through hole
5. Power dissipation : 400mW
6. Resistance : 5 ohm (Ω)
7. Package includes : 20 pieces

BC337 Amplifier NPN transistor pack of 20pcs

Specification

1. Transistor type  :  General Purpose NPN Amplifier Transistor
2. Current Gain  :  100 to 630
3. Continuous Collector current  :  800mA
4. Collector-Emitter voltage  :  45 V
5. Collector-Base voltage  :  50V
6. Emitter Base Voltage  :  5V

4 x 4 inch (10.3m x 10.3cm) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 4 x 4 inch (10.3cm x 10.3cm)
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 10pcs

Specification

1. Supply voltage : 8.5V to 16V
2. Phase slew rate : 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

TIP42C General purpose PNP transistor packs of 50pcs

Specification:-

1. Transistor type :  PNP transistor
2. Max Collector Current  :  –6A
3. Max Collector-Emitter Voltage  :  –100V
4. Max Collector-Base Voltage  :  –100V
5. Max Emitter-Base Voltage  :  –5V
6. Max Collector Dissipation  :  65W

TSOP38238 Infrared receiver 3 pins pack of 10pcs

Specification:-

1. Operating voltage  :  2.5V to 5.5V
2. Operating current  :  350μA
3. Output current  :  5mA
4. Carrier frequency  :  40 kHz
5. Transmission distance  :  40 m
6. Package includes : 10 pieces

1000uf / 250V Aluminum Electrolytic Capacitors (30 x 45)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 30 x 45mm
4. Voltage Rating :  250V
5. Capacitance: 1000uf
6. Capacitance tolerance : ±20%(M)