ALL ELECTRONICS COMPONENTS

Electronic Spices 50Pcs 330 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 330 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 330 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

1000uf 35V Aluminum Electrolytic Capacitors (13 X 25 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 13 x 25 mm
• Impedance (O)max. 20°C 1000KHz = 30
• Ripple current = 1650
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

AO3401-30V 4A P-Channel MOSFET SOT-23 Pack of 50

Specification:-

• Gate to Source Voltage: ±12V
• Power Dissipation: 1.4W 
• Number of Pins: 3
• Drain to Source Voltage: -30V
• Continuous Drain Current: 4.2 
• Input Capacitance: 645pF

0.01μF 103J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 11.0mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω

KBPC25, KBPC3510 35A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Maxim forward voltage : 1.1V

KTC3265 800mA 30V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 30V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 120MHz
7. Gain H(fe): 100/320
8. Collector current:  800mA

1N914 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 75mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 250mW
• Package : DO-34/DO-35

74LS132 Quad 2-Input Schmitt Trigger IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: -65°C to +150°C

20 Pcs 82 Ohm (Ω) 1 Watt ±5% Tolerance 82 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 82 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

BC547 Bipolar NPN transistors box of 2000pcs

Specification

1. Transistor type:  Bipolar NPN Transistor
2. DC Current Gain:  800
3. Continuous Collector current  :  100mA
4. Emitter Base Voltage  :  6V
5. Base Current  :  5mA

1.0μF 105J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 13.0mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

24C16 16K Bit standard 2 wire bus interface serial DIP 8 pin IC pack of 2pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes