NEW ARRIVALS

BT16R11 220V RF Remote Switch 32A | Long Range 1 KM | for Motor Pump & Industrial Use

Specification:-

• Model: BT16R11
• Operating Voltage: AC 220V
• Relay Load Capacity: 32A
• Frequency: 433MHz RF
• Control Range: Up to 1 km (open area)
• Channels: 1-Channel relay output
• Power Input: Direct 220V AC supply
• Material: ABS housing + high-quality FR4 PCB
• Application Load: Motor pumps, heavy machinery, lighting, household appliances

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register

1.5meter Black HDMI Male to Female Extension Cable for LED/LCD TV, Laptop

Specification:-

1. High performance
2. Colour : Black
3. Travel Friendly
4. Connector Type: HDMI
5. Input Connector: 1 x HDMI Male
6. Output Connectors: 2 x HDMI Female
7. Resolution Support: Up to 1080p (Full HD)
8. Size: 1.5 Meter (approx)

3-in-1 Smart Car Kit | Line Follow, Obstacle Avoidance & IR Remote | Compatible with BBC Micro:bit

Specification:

• Product Type: DIY Smart Car Kit
• Functions: Obstacle avoidance, line following, IR remote control
• Compatibility: BBC Micro:bit (not included)
• Control Method: IR remote + Micro:bit programming
• Material: Durable plastic chassis with electronic components
• Power Supply: Battery-operated (batteries not included)
• Recommended Age: 10+ years

Kit Included:

3.7V/12V Remote Relay 1-CH 433MHz Manual Switch | Wireless RF Latching Switch | 12V Transmitter and Receiver

Specification:

• Operating Voltage (Receiver): DC 3.7V–12V
• Relay Output: 1 Channel
• Frequency: 433MHz RF
• Working Modes: Toggle / Momentary / Latching (programmable)
• Control Range: 50–100m (open area)
• Transmitter Battery: 12V A23 battery (typical)
• Receiver Size: Compact, space-saving module
• Pairing System: Learning code (secure, easy setup)

0.25M Type-C to USB Fast Charging Cable 65W 3.1A, Red TPE Short Cable

Specification:

1. Type C Cable
2. Total length: Approx. 0.25 Meter
3. Material: TPE soft wire
4. Current Rating: 3.1A
5. Charging Power: Up to 65W
6. Fast Charging
7. Long-Lasting Performance
8. High-speed data transfer

433MHz 4-Button RF Wireless Remote Control | EV1527 Learning Code | ABS Remote

Specification:-

• Frequency: 433 MHz
• Channel: 4 (A, B, C, D)
• Control Mode: RF Wireless Transmitter
• Range: Up to 30–100 meters (open area)
• Material: ABS plastic + metal keychain hook
• Dimensions: Compact pocket size
• Weight: Lightweight and portable
• Compatibility: Works with all standard 433MHz receivers
• Compatible Devices: Drone, Fan, Garage Door, Home Theater, Streaming Device

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

433MHz 4-CH ABCD RF Remote Control | Universal Wireless Transmitter for Smart Door System

Specification:-

• Frequency: 433MHz
• Channel: 4 (A, B, C, D)
• Control Mode: RF Wireless Transmitter
• Range: Up to 50–100 meters (open area)
• Power Supply: Button cell battery (included)
• Material: ABS plastic + metal keychain hook
• Dimensions: Compact pocket size
• Weight: Lightweight and portable
• Compatibility: Works with all standard 433MHz receivers
• Compatible Devices: Garage and Smart Door

9V 1.2A Power Adapter 5.5x2.5mm Plug Compatible with TP-Link Router

Specification: 

1. Input voltage : 150V to 285V AC
2. Connector Size: 5.5mm x 2.5mm (Male Plug)
3. Output voltage : 9V
4. Power rating : 1.2A
5. Max. frequency range : 50 to 60 Hz
6. Model no: SSP-091
7. High-quality adapter with the latest and advanced technology

12V 2A Adapter with 5.5mm Female BNC Connector, Ideal for CCTV & LED DIY Projects

Specification:

1. Input voltage: AC 100–240V
2. Output voltage: 12V
3. Power rating: 2A
4. Color: Black
5. Max. frequency range: 50 to 60 Hz
6. Over-current, overload, and short circuit protection
7. Type: Power Connector
8. Connector Type - 5.5mm Female BNC Screw-Type Connector