NEW ARRIVALS

40mm x 12mm Red Robotics Toy Smart Car Wheel | Durable Plastic Tyre with Grip Pack of 4

Specification:-

• Wheel size: 40mm x 12mm
• Color: Black & Red 
• High-quality material build
• Use case: Robot / Smart Car / DIY Robotics
• Wheel material: Durable Plastic Tyre with Grip

Male-Female Extension Wall Cord Cable | 3-Pin 3-Meter PVC | Suitable for Computers

Specification:

• Type: 3-Pin Male-Female Extension Cable
• Voltage Rating: 220–250V AC
• Cable Length: 3 Meters
• Color: White
• Material: High-grade PVC
• Connector Gender: Male-to-Female

13.56MHz RFID Tag with Green Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Green 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

Super Mega 2560 Starter Kit | Complete Beginner’s Learning Kit Compatible with Arduino IDE (136 Item)

Specification:-

• MEGA2560 MCU REV3 development board
• 5mm round shape LED 
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• 12x12x7.3 mm Push Button Switch with Cap 
•  Yellow/Green LCD display module

Kit Included: 1 pcs Aadruino Mega 2560 Board | 1 pcs Mega 2560 Shield | 1 pcs Remote (IR Remote Control) | 1 pcs 1602 LCD Display | 1 pcs 830 Points Breadboard | 1 pcs 40 Pin Header | 1 pcs Potentiometer | 30 pcs LED (Red, Green, Blue) | 1 pcs USB Cable | 20 pcs Jumper Wires (Male to Male) | 20 pcs Jumper Wires (Female to Male) | 1 pcs 9V Battery Supply Connector | 4 pcs Push Button with Caps (Colored) | 1 pcs Stepper Motor with Driver | 1 pcs Mini Breadboard | 1 pcs Servo Motor (SG90 9G) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs 4-Digit 7 Segment Display | 1 pcs 1-Digit 7 Segment Display | 1 pcs IC 74HC595 | 1 pcs Flame Sensor | 1 pcs Photoresistor (LDR Sensor) | 1 pcs NPN Transistor | 1 pcs IR Receiver Module | 1 pcs Vibration Sensor / Tilt Sensor | 40 pcs Resistors – (1K, 10K, 220Ω, 330Ω)

Wireless IoT Starter Kit with NodeMCU ESP8266 | Compatible with Arduino IDE (237 Item)

Specification:-

• 1/4-watt Resistors
• 5V Piezoelectric Buzzer
• 830 points Half-size breadboard 
• 12 x 12 x 7 mm tactile switch
• USB Cable for Arduino Nano
• MB-102 Power Supply Module
• Wi Fi Networking Esp8266 Development Board

Package Included:- 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard (Large) | 1 pcs Breadboard Power Supply Module | 5 pcs Push Button  | 1 pcs Potentiometer 10k | 1 pcs Photoresistor (LDR Sensor) | 1 pcs L293D Motor Driver IC | 3 pcs IC 74HC595 Shift Register | 4 pcs 2N2222 NPN Transistor | 25 pcs LEDs (White, Red, Blue, Yellow, Green)   | 1 pcs Fan (DIY Propeller) | 1 pcs DC Motor | 1 pcs 7 Segment Display (4 Digit) | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 1 pcs Bar Graph LED Module | 1 pcs 5V Relay Module | 1 pcs RGB LED Module | 40 pcs Jumper Male-to-Male | 40 pcs Male-to-Female Jumper Wires | 1 pcs Bidirectional Logic Level Converter (Translator) | 2 pcs 1N4007 Diode | 1 pcs USB Cable | 1 pcs 9V Battery Holder with Connector | 100 pcs Resistor Pack (assorted values) (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

9V 1.2A Power Adapter 5.5x2.5mm Plug Compatible with TP-Link Router

Specification: 

1. Input voltage : 150V to 285V AC
2. Connector Size: 5.5mm x 2.5mm (Male Plug)
3. Output voltage : 9V
4. Power rating : 1.2A
5. Max. frequency range : 50 to 60 Hz
6. Model no: SSP-091
7. High-quality adapter with the latest and advanced technology

Combo of Wire Crimp Connector Assorted Kit | Ring, Spade, Fork, Butt, Male & Female Connectors (280 Pcs)

Specification:-

• Product Type: Assorted Wire Connector Kit
• Material: Copper + PVC Insulation
• Total Pieces: 280 pcs
• Connector Types: Ring, Spade, Fork, Butt, Male, Female
• Color Code: Red (22–16 AWG), Blue (16–14 AWG), Yellow (12–10 AWG)
• Package Type: Compartmentalized plastic storage box

6.8pF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 6.8pF
• Tolerance :  ±  10%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C 

40mm x 12mm Yellow Robotics Toy Smart Car Wheel | Durable Plastic Tyre with Grip Pack of 4

Specification:-

• Wheel size: 40mm x 12mm
• Color: Black & Yellow  
• High-quality material build
• Use case: Robot / Smart Car / DIY Robotics
• Wheel material: Durable Plastic Tyre with Grip

60 x 5.7mm Hard Plastic Build Rubber Cover Wheel for Stepper Motor Pack of 4

Specification:-

• Diameter of the wheel: 60mm
• Width of the wheel: 5.7mm
• Color: Black & White
• High-quality material build
• High ground grip for better performance

46-in-1 DIY Sensor Kit (37-in-1 + Extra Modules) | Compatible with Arduino IDE & Raspberry Pi

Specification:-

• Modules Included: 46 modules (37-in-1 sensor kit + 9 additional modules)
• Durability: High-quality, reusable modules designed for long-term experimentation
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• Programming Support: Fully supports Arduino IDE, Python, and Scratch-based coding platforms

Package includes:
1x Real time clock | 1x Joystick | 1x 5v relay | 1x Big sound | 1x Small sound | 1x Tracking | 1x Avoidance | 1x Water sensor | 1x Flame sensor | 1x Linear hall | 1x Touch sensor | 1x Digital temperature | 1x Active buzzer | 1x Passive buzzer | 1x  rgb | 1x Ultrasonic sensor | 1x Two color led | 1x Mini two color led | 1x Reed | 1x Mini reed | 1x Mpu 6050 | 1x Heartbeat | 1x 7 Color led | 1x Mp1584en | 1x Push button | 1x Shock sensor | 1x Rotatory encoder | 1x Light cup | 1xTilt switch | 1x Ball switch | 1x Photo resistor | 1x Gas sensor | 1x Analog hall | 1x Magnetic hall | 1x Temp 18b20 | 1x Analog temp | 1x IR Receiver | 1x Light blocking | 1x Sd card reader | 1x IR emitter | 1x Temp and humidity | 1x Laser emitter | 1x Smd rgb | 1x Soil moisture sensor | 1x Tap module | 1x Breadboard power supply.

Proto Shield Kit Compatible for Arduino Mega R3

Specification:

• Compatibility: Arduino Mega R3
• Shield Type: Prototyping Shield with mini breadboard
• Mini Breadboard: Detachable, reusable
• Prototyping Area: Large solderable area with pads
• Onboard Components: Reset switch, power LED
• Connectivity: Breakouts for all Mega R3 pins