NEW ARRIVALS

12V 10A 120W SMPS LED Driver Power Supply | AC 175–265V to DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Current: 10A 
3. Output Power: 120W
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

STEM Learning 4WD Robot Car Kit | Smart Vehicle Project with Arduino UNO R3 | Bluetooth & Sensor

Specification:-

• Controller Board: Arduino UNO R3 
• Motor Driver Module: L298N Dual H-Bridge Motor Driver
• Motors: 4 × DC Gear Motors with Wheels
• Power Supply: 2 × 18650 Lithium-ion Battery Holder (7.4V)
• Chassis: Acrylic/Metal Chassis Plate with Mounting Holes
• Connectivity: USB Type-A To B Cable for Programming
• Comprehensive C/C++ programming capabilities

5200mAh 12V Li-ion Rechargeable Battery Pack with BMS & DC Male/Female Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 5200Ah
• Connector Type: DC 5.5mm Jack & DC Pin 
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

12V 5A 60W SMPS LED Driver Power Supply | AC 175–265V to 12V DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Current: 5A 
3. Output Power: 60W
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

PD65W USB-C Type Fast Charging Module Board

Specification:-

• Voltage: 12V
• Output Power: 65W
• Board Thickness: 2mm
• Input Interface: USB Type-C
• Output Voltage Levels: 5V / 9V / 12V / 15V / 20V
• Charging Protocols Supported: PD3.1, QC3.0

2000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 2000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

12V DC Brushless Exhaust Blower Fan | Cooling & Air Ventilation Fan

Specification

• Model: DW127530-SL1
• Motor Type: Brushless DC Motor
• Rated Voltage: 12V DC
• Operating Voltage: 9V – 14V DC
• Current Rating: ~0.15A
• Connector Type: 2-Pin JST Connector
• Cable Length: 22cm 
• Fan dimension: 75x73x30 mm (approx.)
• Low power consumption

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register

12V 25A 300Watt SMPS LED Power Supply | with metal case (AC to DC) Converter For CCTV, LED & Router

Specification:-

• Output Voltage: 12V
• Output Power: 300W
• Output Current: 25A
• Input Voltage: 175V/265V AC
• Frequency: 50/60Hz
• IP Level-Waterproof

4000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & 2515 JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 4000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

12V 33A 400Watt SMPS LED Power Supply | AC 175–265V to 12V DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Power: 400W
3. Output Current: 33A
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

12V 2A SMPS DC Power Supply Adapter with two male plug pin connector

Specification:

1. Input Voltage: AC 100–240V
2. Output Voltage: DC 12V
3. Output Current: 2A
4. Connector Type: Two male plug pins
5. Max. frequency range : 50 to 60 Hz