SENSORS & MODULES

DC-DC Step-Up SX1308 Adjustable Power Module Step-Up Boost Converter

Specification:-

• Maximum Input Voltage: DC 2-24V
• Maximum Output Voltage: DC 2-28V
• Maximum Output Current: 2A
• Switching Frequency: 1.2MHz
• Maximum Conversion Efficiency: 95%

Water Sensor Module for Arduino Moisture / Drop / Depth of Water Test - Red

Features:-

1. Sensor Type: Water sensor module.
2. Purpose: Detects moisture, water depth, or water drops.
3. Compatibility: Designed for Arduino and similar platforms.
4. Color: Red.
5. Versatile for various water-related applications in DIY electronics and projects.

2S 3A-9A 6.4V 32650,32700 Li-ion Lithium battery protection and charger BMS module JH886044 pack of 1pcs

Specification:-

1. Configuration: 2S (Two-cell series)
2. Current Range: 3A-9A
3. Voltage: 6.4V
4. Battery Type: 32650, 32700 Li-ion

DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch

Specification:-

• Actuator Type:  Sensor
• Voltage: DC 12V-60V 
• Output Current:8V
• Operation Mode: ON-OFF
• Output: 1 Channel

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging modules pack of 10pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

IIC or I2C Serial interface adapter module for 16 x 2 (1602) Character LCD display

Specifications:-

1. IC Name : PCF8574
2. Operating voltage : 5V
3. PCB size : 42mm x 20mm(L x B)
4. Serial I2C control of LCD display using PCF8574.
5. Backlight can be enabled or disabled via a jumper on the board.
6. Contrast control via a potentiometer.

12V TO 5V DC converter with 2 USB jacks for mobile charging application with an alligator clip

Specification:-

• Input voltage: 12V DC
• Output voltage: 5V DC
• Frequency: 50HZ/60HZ
• Simple and easy to use design
• Low-cost power converter device with an alligator clip
• Inbuilt over voltage, over current, and short circuit protection

PAM8406 5Wx2 dual channel stereo Mini digital amplifier module with volume control preset pack of 1pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

ESP8266 5V 1 Channel relay module IOT smart home remote control switch

Specifications:-

1. Transmission Distance (m) : 40m
2. Trigger voltage: 5V DC
3. Switching voltage: 250V @ 10A
4. Switching voltage: 30V @ 10A
5. Relay voltage : 5V (10A/250V AC, 10A/30V DC)
6. Baud rate: 9600

Decoder Board Audio Wireless Bluetooth Module Diy Stereo board with support in bluetooth FM,USB,SD-CARD Slot , AUX & TF

Specification

• Connector Type : Bluetooth
• Audio Output Type : Speakers
• Power source : DC
• Material : Plastic
• Dimension : 97 x 16 mm

0.91 Inch 128 x 32 Blue OLED Display Module with I2C/IIC Serial Interface

Specification:-

• Driving IC: SSD1306
• Operating Voltage: 3.3-5V
• Resolution: 128×32 pixels
• Text Color: Blue
• Communication Interface: I2C

Pin:

• GND: Power Ground
• VCC: Power + (DC 3.3 ~5v)
• SCL: Clock Line
• SDA: Data Line