SENSORS & MODULES

MQ-8 Hydrogen gas detection sensor module

Specifications:-

1. Sensor type : Semiconductor
2. Target gas : Hydrogen
3. Working voltage : 24V
4. Heater voltage : 5V
5. Detection range : 100～1000ppm(H2 gas)

250V 16(8) 5M Cable Float Switch Sensor for Water Level Controller

Specification:-

• Cable length: 5m cable 
• Compatible Material: Plastic
• Floaty Water Level Controller
• Rated voltage: 250V
• High quality wire and Plastic Body

4S 100A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 100A 
• Continuous Charge Current: 50A 
• Over-Voltage Protection: 3.75±0.05V  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Working Temp: -20~70 °C 
• Working current: 500 uA 
• Model no. (118e)

Micro SD Card Reader Module

Specification :-

• Input Voltage: 3.3V/5V
• Current: 0.2~200mA
• Working voltage: VCC 4.5~5.5V
• Micro SDHC up to 32GB
• Supports Micro SD up to 2GB
• Pinouts: GND, VCC, MISO, MOSI, SCK, CS; SPI
• Micro SD Card Slot: Supports standard micro SD cards

12V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

BH1750 - Light detection or Lux sensor module

Specifications:-

1. Power Supply : 2.4V-3.6V
2. Less current consumption : 0.12mA
3. Measuring Range : 1 - 65535lx
4. Very small effect of IR radiation
5. Responsive near to the human eye.

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 50pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

4000W 220V PWM High-Power Dimming Speed Regulator

Specifications :-

• Input Voltage: 220V AC.
• Maximum Power: 4000W.
• Adjustable Voltage: 0-220V AC.
• AC frequency: 50-60Hz.

GP2Y1010AU0F Dust and smoke particle detection sensor module

Specifications:-

1. Sensitivity : 0.5V/(100μg/m3)
2. Measurement range : 500μg/m3
3. Power : 2.5V to 5.5V
4. Operating current : 20mA(max)
5. Operating temperature : -10℃ to 65℃

24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

A3144 - Hall effect detection sensor module

Specifications:-

1. Operating voltage: 5V DC
2. Output Current: 25mA
3. Power Consumption at Rest: 3mA
4. Detector type: Magnetic Sensing Hall effect
5. Detecting range: 7 mm
6. Easy to use with Microcontrollers
7. Small, cheap, and easily available

4S 40A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 40A 
• Continuous Charge Current: 20A 
• Over-Voltage Protection: 3.75±0.05  
• Balance Current: 30±5mA  
• Charge Voltage: 14.6V 
• Model no. (11b3)