SENSORS & MODULES

W5100 Arduino Ethernet Shield Network Expansion Board

Specification:-

• Chipset: W5100 Ethernet chip
• Interface: SPI for communication with Arduin
• Can be used to store files for serving over the network.
• Can be accessed using the Mini SD TF library.
• MicroSD Card Slot: Standard microSD card slot for data storage

DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink

Specifications:-

• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max(24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstepping: Full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step

4S 2A Lithium Battery Balance Board

Specification:-

• Software active equalization 
• Number of battery pack strings - 4S  
• Balance current ≤2A  
• Balance mode - Active equilibrium  
• working temperature -20°C~60°C  
• Model no. (7421)

47μH 15A Ferrite Magnetic Inductor Coil 1.2mm Wire dia (20x10mm)

Specification:-

• Inductance: 47μH
• Core Material: Ferrite
• Outer Diameter: 20mm
• Height: 10mm
• Current Rating: 15A
• Wire Diameter: 1.2 mm
• Shape: Toroidal

Smart NMC BMS Li-ion 14S 48V 40A Common port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 14S 48V 40A 
• Continuous Discharge Current: 40A 
• Balance detect Voltage 3.8 
• Charge Current: 20A 
• Charge Voltage: 58.8V 
• Model no. (2188)

ENC28J60 Ethernet Module 12-Pin

Specification:-

• 25MHz Crystal
• 5 V power supply pin
• Driver IC : ENC28J60-I/SO
• Ethernet Port: HanRun HR911105A
• Compatible For Arduino, SPI, AVR, PIC, LPC, STM32

Pin Configuration:

• 5V: 5V power supply
• GND: Ground
• LNT: Interrupt pin
• CLK: Clock output from ethernet controller
• SO: SPI Output
• WOL: Wake-on-LAN (optional)
• SCK: SPI Clock
• ST: SPI Input
• RST: Reset pin
• CS: Chip Select
• Q3:  that this is the RX 3.3V supply

9.9mm x 3.7mm Strong Silver Neodymium Magnet

Specification:-

• Material: Neodymium (NdFeB)
• Diameter: 9.9mm
• Thickness: 3.7mm
• Magnetization: Axial
• Operating Temperature: -40°C to +80°C

33μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)

Specification:-

• Inductance: 33μH
• Core Material: Ferrite
• Outer Diameter: 12mm
• Height: 6mm
• Current Rating: 3A
• Wire Diameter: 0.6 mm
• Shape: Toroidal

Smart LiFePO4 8-24S 100A BMS (BD6A24S6PY)

Specification:-

• Number of Battery Strings (Lifepo4): 8S-24S 
• Balance Current: 0.6A 
• Continuous charging current: 100A  
• Continuous discharging current: 100A  
• Voltage Acquisition Accuracy: ±5 mV 
• Single Cell Voltage Range: 1.5V 
• Model No.(7af9)

Case Raspberry Pi 3 ABS Black Color

Specification:-

• Case Type: Raspberry Pi
• Number of USB 2 Ports: 2
• Color: Black
• Compatibility: Raspberry Pi 3 Models
• Power Supply Mounting Type: External/Off-Product Mount

16S 80A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 16S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 80A 
• Over-Voltage Protection: 3.8V  
• Balancing Current: 50mA  
• Charge Voltage: 58.4V 
• Model no. (10db)

33μH 5A Ferrite Magnetic Inductor Coil 0.7mm Wire dia (13x6mm)

Specification:-

• Inductance: 33μH
• Core Material: Ferrite
• Outer Diameter: 13mm
• Height: 6mm
• Current Rating: 5A
• Wire Diameter: 0.7 mm
• Shape: Toroidal