SENSORS & MODULES

47μH 15A Ferrite Magnetic Inductor Coil 1.2mm Wire dia (20x10mm)

Specification:-

• Inductance: 47μH
• Core Material: Ferrite
• Outer Diameter: 20mm
• Height: 10mm
• Current Rating: 15A
• Wire Diameter: 1.2 mm
• Shape: Toroidal

4S 80A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 80A 
• Continuous Charge Current: 40A 
• Over-Voltage Protection: 3.75±0.05V  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Working Temp: -20~70 °C 
• Working current: 500 uA 
• Model no. (1199)

4S 2A Lithium Battery Balance Board

Specification:-

• Software active equalization 
• Number of battery pack strings - 4S  
• Balance current ≤2A  
• Balance mode - Active equilibrium  
• working temperature -20°C~60°C  
• Model no. (7421)

ENC28J60 Ethernet Module 12-Pin

Specification:-

• 25MHz Crystal
• 5 V power supply pin
• Driver IC : ENC28J60-I/SO
• Ethernet Port: HanRun HR911105A
• Compatible For Arduino, SPI, AVR, PIC, LPC, STM32

Pin Configuration:

• 5V: 5V power supply
• GND: Ground
• LNT: Interrupt pin
• CLK: Clock output from ethernet controller
• SO: SPI Output
• WOL: Wake-on-LAN (optional)
• SCK: SPI Clock
• ST: SPI Input
• RST: Reset pin
• CS: Chip Select
• Q3:  that this is the RX 3.3V supply

33μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)

Specification:-

• Inductance: 33μH
• Core Material: Ferrite
• Outer Diameter: 12mm
• Height: 6mm
• Current Rating: 3A
• Wire Diameter: 0.6 mm
• Shape: Toroidal

9.9mm x 3.7mm Strong Silver Neodymium Magnet

Specification:-

• Material: Neodymium (NdFeB)
• Diameter: 9.9mm
• Thickness: 3.7mm
• Magnetization: Axial
• Operating Temperature: -40°C to +80°C

Case Raspberry Pi 3 ABS Black Color

Specification:-

• Case Type: Raspberry Pi
• Number of USB 2 Ports: 2
• Color: Black
• Compatibility: Raspberry Pi 3 Models
• Power Supply Mounting Type: External/Off-Product Mount

Smart BMS LiFePO4 23S 72V 50A Common Port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 23S 72V 50A
• Continuous Discharge Current: 50A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 25A 
• Charge Voltage: 83.95V 
• Model no. (46ca)

33μH 5A Ferrite Magnetic Inductor Coil 0.7mm Wire dia (13x6mm)

Specification:-

• Inductance: 33μH
• Core Material: Ferrite
• Outer Diameter: 13mm
• Height: 6mm
• Current Rating: 5A
• Wire Diameter: 0.7 mm
• Shape: Toroidal

4.5-24V To 0.8-17V DC to DC Step Down Converter

Specification:-

• Input Voltage: DC 4.5-24V
• Adjustable Range: 0.8-17V, fixed voltage (1.8V, 2.5V, 3.3V, 5V, 9V, 12V)
• Output Current: 3A (max), Actual Testing Input: 12V Output: 1.5A
• Transform Efficiency: 97.5% (max) (6.5 to 5V 0.7A)
• Switch Frequency: 500KHz
• Output Ripple Wave: 20 mV (12V to 5V 3A) 20m bandwidth

Smart LiFePO4 8-24S 100A BMS (BD6A24S6PY)

Specification:-

• Number of Battery Strings (Lifepo4): 8S-24S 
• Balance Current: 0.6A 
• Continuous charging current: 100A  
• Continuous discharging current: 100A  
• Voltage Acquisition Accuracy: ±5 mV 
• Single Cell Voltage Range: 1.5V 
• Model No.(7af9)

16S 80A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 16S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 80A 
• Over-Voltage Protection: 3.8V  
• Balancing Current: 50mA  
• Charge Voltage: 58.4V 
• Model no. (10db)