SENSORS & MODULES

Smart 20S 1A Li-Ion/LiFePO4 Software Active Balancer

Specification:-

• Software active equalization 
• Number of battery pack strings - 20S  
• Balance current ≤1A  
• Balance mode - Active equilibrium  
• Working temperature: -20°C~60°C 
• Model no. (48f9)

Smart LiFePO4 8-24S 100A BMS (BD6A24S6PY)

Specification:-

• Number of Battery Strings (Lifepo4): 8S-24S 
• Balance Current: 0.6A 
• Continuous charging current: 100A  
• Continuous discharging current: 100A  
• Voltage Acquisition Accuracy: ±5 mV 
• Single Cell Voltage Range: 1.5V 
• Model No.(7af9)

NE555 Pulse Generator Adjustable Frequency Single Channel Output Module

Specification:-

• Working voltage: 5-12V
• On-board chip NE555.
• Operation Mode: ON-OFF
• A single-channel output
• Onboard adjustable resistance
• 100% Brand new and high quality

4-8S 60A Smart Active Balance Li-Ion-LiFePO4 BMS (R24TK1A)

Specification:-

• Model Number: R24TK1A (7637)
• Cell sampling voltage range: 1.5V-4.9V 
• Operating voltage range: >10V 
• Balance method: Active Balance 
• Working power consumption: ≤1.25W 
• working temperature -40°C~85°C 

T6845-B Power Bank Charging Circuit Module with 2-Pin JST Connector

Specification:-

• Charging Voltage: 5V DC
• Charging Current: 1 mA
• LED indication
• USB Output Voltage: DC5V
• USB Output Current: 1200 mA
• Charging Interface:  Micro USB port
• Use Battery: 18650, 3.7V, 12000 mAh

Smart BMS LiFePO4 16S 48V 80A Common Port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 16S 48V 80A
• Continuous Discharge Current: 80A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 40A 
• Charge Voltage: 58.4V 
• Model no. (219b)

8S 50A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 8S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 40A 
• Over-Voltage Protection: 3.8V  
• Balancing Current: 50mA  
• Charge Voltage: 29.2V
• Model no. (10e5)

4S 5A Lithium Battery Balance Board

Specification:-

• Software active equalization 
• Number of battery pack strings: 4S  
• Balance current ≤5A  
• Balance mode - Active equilibrium  
• working temperature: -20°C~60°C 
• Model no. (5420)

4S 2A Lithium Battery Balance Board

Specification:-

• Software active equalization 
• Number of battery pack strings - 4S  
• Balance current ≤2A  
• Balance mode - Active equilibrium  
• working temperature -20°C~60°C  
• Model no. (7421)

14.9mm x 3.7mm (15x4mm) Strong Silver Disc Shape Neodymium Magnet

Specification:-

• Material: Neodymium (NdFeB)
• Shape: Disc
• Diameter: 14.9mm (~15mm)
• Thickness: 3.7mm (~4mm)
• Magnetization: Axial
• Operating Temperature: -40°C to +80°C

ENC28J60 Ethernet Module 12-Pin

Specification:-

• 25MHz Crystal
• 5 V power supply pin
• Driver IC : ENC28J60-I/SO
• Ethernet Port: HanRun HR911105A
• Compatible For Arduino, SPI, AVR, PIC, LPC, STM32

Pin Configuration:

• 5V: 5V power supply
• GND: Ground
• LNT: Interrupt pin
• CLK: Clock output from ethernet controller
• SO: SPI Output
• WOL: Wake-on-LAN (optional)
• SCK: SPI Clock
• ST: SPI Input
• RST: Reset pin
• CS: Chip Select
• Q3:  that this is the RX 3.3V supply

W5100 Arduino Ethernet Shield Network Expansion Board

Specification:-

• Chipset: W5100 Ethernet chip
• Interface: SPI for communication with Arduin
• Can be used to store files for serving over the network.
• Can be accessed using the Mini SD TF library.
• MicroSD Card Slot: Standard microSD card slot for data storage