SENSORS & MODULES
Showing 1–12 of 879 results
-
16S 60A LFP BMS Hardware (ZP16S011)
Rs. 1339.00Specification:-
- Model: ZP16S011
- charging voltage: 3.6V Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 60A
- Continuous discharging current: 60A
- Consumption of running: ≤150uA
- -Circuit resistance: ≤10mR
- Operating temperature: -20°C-75°C
- Model no. (7664)
-
NA-3W-K Signal Relay DPDT 3V 2A Through Hole 8-Pin
Rs. 500.00Specification:-
- Package: DIP 8-Pin
- Max. carrying current: 2A
- Max. switching voltage: 250 VAC/ 220 VDC
- Max. switching power: 62.5VA / 30W
- Max. switching current: 2A
- Min. switching load: 0.01 mA, 10 mVDC
- Relay Contact Form: 2 Form C (DPDT)
-
10S 40A BMS NMC Hardware Waterproof
Rs. 1459.00Specification:-
- Continuous Discharge Current: 40A
- Over-Voltage Protection: 4.2V
- Charge Current: 10A
- Charge Voltage: 42V
- Battery Configuration: 10S for NMC (Nickel Manganese Cobalt) Lithium-Ion
- Model no. (15db)
-
8mm x 3mm Strong Silver Disc Shape Neodymium Magnet Pack of 2
Rs. 39.00Specification:-
- Material: Neodymium (NdFeB)
- Shape: Disc
- Dimensions: 8mm (Diameter) x 3mm (Thickness)
- Magnetization: Axial
- Operating Temperature: -40°C to +80°C
- Coating: Ni+Cu+Ni (Nickel Coated)
-
DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)
Rs. 500.00Specification:
- Frequency: 315MHz RF
- Operating Voltage (Relay): DC 12V
- Standby Current: 10mA
- Remote Distance: 20-200m
- Relay Channels: 4CH (4 independent relays)
- Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
- Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch
-
2S 4A NMC BMS Hardware Module with Nickel Strip
Rs. 29.00Specification:-
- Charging Voltage: DC:8.4-9.0V CC/CV
- Max continuous charging current: 4A
- Over charge detection voltage: 4.25±0.05V
- Over discharge detection voltage: 2.9±0.1V
- Over current detection current: 0.2±0.02V
- Operating Temperature: -45°C to +65°C
- Storage Temperature: -45°C to +85°C
- Model No.(7fd9)
-
4S 50AMP LFP BMS Hardware (ZP04S014)
Rs. 869.00Specification:-
- Charging voltage: 3.6V Number of strings
- Cell voltage range: 2.20~3.75V
- Continuous charging current: 25A
- Continuous discharging current: 50A
- Consumption of running: ≤150uA
- - Circuit resistance: ≤10 mR
- Operating temperature: -20°C-75°C
- Model no. (79da)
-
3mm x 1.5mm Strong Silver Disc Shape Neodymium Magnet Pack of 2
Rs. 29.00Specification:-
- Material: Neodymium (NdFeB)
- Shape: Disc
- Dimensions: 3mm x 1.5mm
- Magnetization: Axial
- Operating Temperature: -40°C to +80°C
- Coating: Ni+Cu+Ni (Nickel Coated)
-
13S 100A BMS NMC Hardware Waterproof
Rs. 4059.00Specification:-
- Continuous Discharge Current: 100A
- Over-Voltage Protection: 4.2V
- Charge Current: 20A
- Charge Voltage: 54.6V
- Battery Configuration: 13S for NMC (Nickel Manganese Cobalt) Lithium-Ion
- Model no. (0fd8)
-
4.8mm x 2.5mm High Power Strong Silver Disc Shape Neodymium Magnet Pack of 2
Rs. 39.00Specification:-
- Material: Neodymium (NdFeB)
- Shape: Disc
- Dimensions: 4.8mm x 2.5mm (Approx. 5x3mm)
- Magnetization: Axial
- Operating Temperature: -40°C to +80°C
- Coating: Ni+Cu+Ni (Nickel Coated)
-
XY-485 TTL–RS485 Level Converter Module 3.3V/5V
Rs. 500.00Specification:
- Model: XY-485
- Product Type: TTL to RS485 Adapter Module
- Model: XY-485
- Operating Voltage: 3.3V – 5V DC
- Logic Level: 3.3V / 5V TTL Compatible
- Interface: UART (TXD, RXD)
- Communication Type: Half-Duplex RS485
- Chipset: Single-chip RS485 Transceiver
-
8S 2A Lithium Battery Balance Board
Rs. 509.00Specification:-
- Software active equalization
- Number of battery pack strings: 8S
- Balance current ≤2A
- Balance mode - Active equilibrium
- working temperature: -20°C~60°C
- Model no. (7422)