SENSOR MODULES
Showing 1–12 of 129 results
-
![W5500 Ethernet Network Modules for Arduinos]()
W5500 Ethernet Network Modules for Arduinos
Rs. 549.00Specifications
- Type: Drive IC
- 3.3 V or 5 V level.
- LAN Ethernet: 10/100Mbps
- Module test: test software
- W5500 hardware initialization pen
-
![I2C 2 Channel Logic Level Converter with Regulator Module]()
I2C 2 Channel Logic Level Converter with Regulator Module
Rs. 39.00Specification:-
- AVCC = 5V input
- BVCC = 3.3V output
- ASCL / BSCL = I2C Clock Channel
- ASDA / BSDA = I2C Data Channel
- GND = Ground (x2). At least one needs to connect to 5V ground.
-
![KY-036 Metal Touch Sensor Module Responds To The Light Indicating Touch]()
KY-036 Metal Touch Sensor Module Responds To The Light Indicating Touch
Rs. 69.00Specifications: -
- Type Working voltage: 3.3V to 5.5V
- Type Current consumption: 10mA
- Type Output: Analog and digital
- Type Sensitivity: Adjustable
- Type Dimensions: 43 x 16 mm
-
![DHT 22/AM2302 Digital Temperature and Humidity Sensor]()
DHT 22/AM2302 Digital Temperature and Humidity Sensor
Rs. 389.00Specification:-
- Model: AM2302
- Supply Voltage: 3.3 to 5V
- Current: 5mA
- Humidity Range: 0-100%
- Humidity Accuracy: 2-5%
- Temperature Range: -40 to 80°C
- Temperature Accuracy: 0.5°C
- Sampling Rate: 0.5 Hz (Once every 2 seconds)
-
![JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader]()
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader
Rs. 489.00Specification:-
- Model: JT308
- Frequency: 125Khz.
- Power input: Through usb
- Support for EM4100 cards
- Interface: USB, 106bit / s, no additional driver required.
- Read the first 10 digits of the RFID/Proximity card.
-
![SW1801 – Vibration sensor module]()
SW1801 – Vibration sensor module
Rs. 69.00Specifications:-
- Operating Voltage: 3.3V to 5V DC
- Operating Current: 15mA
- LEDs indicating output and power
- Small, cheap, and easily available
- Bolt holes for easy installation
-
![MAX 6675 Module with K Type Thermocouple Sensor]()
MAX 6675 Module with K Type Thermocouple Sensor
Rs. 299.00Specification:-
- Operating Voltage: 3.0V to 5.5V
- Interface: SPI
- Resolution: 0.25°C
- Temperature Range(°C): 0 to +1024
- K-type temperature probe
- Application: For Arduino, Raspberry Pi etc.
-
![3kg Load Cell Weighing Scale Sensor With Wire]()
3kg Load Cell Weighing Scale Sensor With Wire
Rs. 129.00Specification:-
- Material: Aluminum
- Capacity: 3kg (3000 grams)
- Operating Voltage: 5v to 10v
- Rated Output: 1.0 ± 0.1mV / V
- Input Impedance: 1066 ± 10% Ω
- Output Impedance: 1000 ± 10% Ω
- Operating Temperature Range: -21º ~ 40º C
-
![DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch]()
DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch
Rs. 299.00Specification:-
- Actuator Type: Sensor
- Voltage: DC 12V-60V
- Output Current:8V
- Operation Mode: ON-OFF
- Output: 1 Channel
-
![110-240 AC 300W/1200W Automatic Infrared Motion Sensor Switch]()
110-240 AC 300W/1200W Automatic Infrared Motion Sensor Switch
Rs. 399.00Specification:-
- Power source: 110-240V AC
- Power consumption: 0.45W (static 0.1W)
- Time delay: Min: 8s±3sec
- Light-control: <3LUX(adjustable)
- Detection range: 12m Max (24°C)
- Detection angle: 180°
- Installation height: 1.8m~2.5m
- Working temperature: -10°C~+40°C
- Working humidity: <93%RH
-
![AR28 Nano Expansion Shield Sensor for Arduino]()
AR28 Nano Expansion Shield Sensor for Arduino
Rs. 139.00Specification:-
- Power jack
- Expansion shield for Arduino Nano
- Pin out for 14 digital input/output pins
- Pin out for 6 PWM outputs
- Pin out for 8 analog inputs
- Pin out for I2C Interface
- Power indicator LED
-
![MD30-60 Waterproof Durable Force Sensor]()
MD30-60 Waterproof Durable Force Sensor
Rs. 349.00Specifications:-
- Model: MD30-60
- Length: 25 mm
- Width: 8 mm
- High Sensitivity
- Test voltage: typically dc3.3v
- Working temperature: - 20 ℃ ~ 60 ℃