THE GREAT COMBO'S

Combo of 8 Inch Combination Plier with 140mm Electrical Screwdriver Tester

Specification:-

• Plier length: 8 inches (200mm)
• High-quality stainless steel 
• Screwdriver length: 140mm
• Type of bulb: Neon bulb
• Color of the tester: Yellow

DIY Alcohol Ethanol and Breath Gas Dectection Kit|Science Project Kit (52 Item)

Specification:-

• IC name : LM393
• Operating voltage : DC 3V to 5V
• Ambient temperature: -10℃ to 65℃
• Working voltage: 6V to 12V
• Max. flow : 50 liter/hour

Package Included:- 1 Pcs 9V Battery, 1 Pcs 9V Battery Clip connector, 1 Pcs TIP 31C, 1 Pcs Multicolore Ribon Cable, 1 Pcs PCB Board, 1 Pcs water motor pump with 1M Pipe ,1 Pcs Gas Detection Module, 5 Pcs 1/4w 100 Ohm Resistor, 40 Pcs Female to Female Jumper wire

Combo of Cable Gland (All Values PG7, PG11, PG13.5, PG16, PG19, PG9)

Specification:-

• Material: Polyamide plastic
• Provides waterproof covering to cables
• Prevent cables from wearing out or getting damaged
• Versatile Cable Gland Set
• IP68 Waterproof Rating

Package includes:-  All sizes cable gland connectors (PG7, PG11, PG13.5, PG16, PG19, PG9), each 4pcs

Smart Learning Robotics & IoT Kit | Beginner to Advanced STEM Project Kit | Compatible with Arduino IDE & Uno R3 (154 Item)

Specification:-

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• ESP8266 Wireless WiFi Transceiver
• DC toy Motor Driver with wire
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1 pcs Uno R3 Board | 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard Small Size with 400 Points Solderless | 2 pcs Push Button with Caps | 1 pcs Potentiometer | 1 pcs ESP01 8266 | 1 pcs 7 Segment 1 Digit Cube Display | 1 pcs IC 74HC595 | 1 pcs Transistor PNP2222 | 15 pcs LEDs (Red, Blue, Green) | 1 pcs DHT11 with PCB (3 pin) | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs RGB LED with PCB | 1 pcs 1602 I2C LCD Display | 1 pcs Active Buzzer | 1 pcs Passive Buzzer  | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs HC05 Bluetooth Module | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K assorted) | 20 pcs Jumper Wire (Male to Male) | 20 pcs Jumper Wire (Female to Female) | 20 pcs Jumper Wire (Female to Male) | 1 pcs Diode 1N4001 | 1 pcs 5V Relay Module | 2 pcs IR Line Sensor | 2 pcs Photoresistor | 1 pcs L293D Motor Driver Shield with soldered pins | 1 pcs Power Supply Box (6 Cell Holder) | 1 pcs Ultrasonic Sensor Holder | 1 pcs 2WD Car Chassis

Combo of MB-102 3.3V/5V Power Supply Breadboard Module with 5.5mm USB Cable (3 pcs each)

Specification:-

• Pin size : 5.5mm Male
• 3.3V/5V Power Supply Module
• Maximum Output Current: <700 mA
• Contact material: high-quality copper
• Output Voltage Can be switched to 0V, 3.3V, or 5V

Package Included:- 3 pcs MB-102 Power Supply Module, 3 pcs 5.5mm USB Cable 

Combo of 8-in-1 25-watt soldering iron starter kit for Project Work

Specification:-

• 25-watt soldering iron
• Stainless steel wire cutter
• Heavy metal solder stand
• Iron stand with spring holder
• De-solder wire and Soldering iron wire
• Excellent choice for soldering purposes

Kit includes:- 1 x Tweezer, 1 x Soldering Iron, 1 x Soldering Stand, 1 x wire cutter, 1 x Soldering Flux, 1 x DE soldering Wire, 1 x Cleaning Sponge, 1 x De soldering wik

Combo of 1K 3 Pin Round Shaft Rotary Potentiometer Volume Pot 1K with Knob (Pack of 4)

Specification:-

• 10K 3 Pin Single Turn Rotary Potentiometer Pot
• Type : Single turn rotary potentiometer
• Rotational Life : 2000K cycles
• Rotation Limit: 270-degree rotation.
• Can be use for multiple applications

3-in-1 Robotics Starter Kit | Multipurpose DIY Robot Kit | Compatible with Arduino Uno R3 (181 Item)

Specification:

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7.3 mm tactile switch with cap
• ESP8266 Wireless Wi Fi Transceiver
• DC toy Motor Driver with wire
• 1 Digit 7 Segment LED Display
• Jumper Wire Cable 26AWG (21cm)
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1x Uno R3 Board | 1x Breadboard (400 points) | 1x 7 Segment Display (1 Digit) | 2x Push Buttons (with caps) | 1x Potentiometer | 1x DC Motor | 1x SG90 Servo Motor | 1x RGB LED Module | 2x Transistor PN2222 | 15x LEDs (Red, Green, Blue) | 1x Active Buzzer | 1x Passive Buzzer | 1x HC-SR04 Ultrasonic Sensor | 10x Resistors 220Ω | 10x Resistors 1kΩ | 40x Female-to-Female (F-F) Jumper Wires | 40x Male-to-Female (M-F) Jumper Wires | 40x Male-to-Male (M-M) Jumper Wires | 2x Diode 1N4001 | 1x Relay Module | 2x Line Sensor  | 2x Photoresistor Sensor  | 1x L293D Motor Driver Shield | 1x Battery Power Supply (with holder) | 1x Ultrasonic Sensor Holder | 1x 2WD Car Chassis

Combo of Sensor Modules Kit Compatible with Uno R3, Mega 2560 (19pcs)

Specifications:-

• 1 Channel infrared Receiver Flame Sensor
• MQ-2 Flammable gas and smoke detection sensor
• PIR Motion Detector Sensor Module
• Connecting Wires and Accessories
• Power indicator, the output signal LED indicator
• Micro SD TF Card Memory Shield Module

Kit includes: detection sensor, RTC Module, Humidity Sensor, Motion Detector, Wireless Transmitter, Laser detector, wireless Sensor, Soil Moisture Sensor, raindrop Sensor, soil moisture Sensor, microphone Sensor, track follower sensor, flame sensor, infrared sensor, LDR light sensor, Dumping Sensor, Vibration Sensor Module 

Combo of Multi-Functional Hand Tools | 8" Plier | Wire Stripper | Tester | Nose Plier | Cutter & 2-in-1 Screwdriver

Specification:-

• The total length of the plier: 8 inches (200mm)
• High-quality stainless steel manufacturing
• Nickel plating provides corrosion resistance
• Total length of Screwdriver: 175mm
• 130 mm wire stripper 
• Electrical screwdriver tester, 140 mm length
• Combination plier with hard plastic insulated handles

Kit includes:-  1pcs Combination Plier 200Mm, 1pcs Wire Stripper 130Mm, 1pcs Tester, 1pcs Nose Plier, 1pcs 2In1 Screwdriver, Cutting Plier

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

DIY Rain Sensor Kit for Science Experiment | Learning Kit (27 Item)

Specification:-

• Operating voltage : 3.3V to 5V
• Quiescent current: 2mA
• Model name : 6F22M
• Nominal voltage : 9V
• Power indicator, the output signal LED indicator
• Type: Piezoelectric Buzzer
• Length: 9.5mm
• Diameter: 12 mm
• Current: <25MA

Package Included:-  1 Pcs 5V Buzzer, 1 pcs 9V toy battery, 1 pcs 9v Battery clip connector, 5 pcs 10 Ohm Resistor, 5 pcs white 5mm LED, 10 Pcs Female to Female Jumper wire, 1 pcs TIP 31C IC, 1 pcs multicolor Ribon Color 1 pcs Rain Weather Detect Sensor, 1 pcs PCB Board