THE GREAT COMBO'S

Combo of RC522 RFID Door Lock Arduino Project Kit (46 pcs)

Specification :- 

• 13.56MHz RFID Card Reader Module
• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• UNO R3 AVR USB Development board
• 26AWG Jumper Wire cable 
• 9V battery clip connector with 3.5mm pin jack
• USB Cable for Arduino Nano
• 9V 6F22M Hi-Watt Non-rechargeable battery 

Package Included :- 1 x RC522 RFID 13.56MHZ Reader Writer Module, 1 x Arduino Uno R3 Compatible board, 1 x SG90 Servo Motor, 1 x High Quality 9V Battery, 1 x USB Cable for Arduino Nano , 1 x 9V Battery Clip Connector, 1 x 20cm Male To Male Jumper Cable Wire, 1 x 20cm Male To Female Jumper Cable Wire

Combo of MB102 3.3V/5V Power Supply Module with Alligator Clip, 9V Battery Clip & Jumper Wire (28 pcs)

Specification:-

• MB-102 3.3V/5V Power Supply Module
• Input Voltage: 6.5–12V (DC) or USB Power
• 40mm crocodile alligator clip 
• 26AWG Jumper Wire cable
• 9V battery clip connector with 3.5mm pin jack
• 830 Points Half Size Solderless Breadboard
• 400 points Half-size Solderless breadboard

Package Included:- 1 x 830 Points Breadboard, 1 x 400 point breadboard , 1 x 9V battery clip connector, 1 x MB-102 Power Supply Module, 4 x Crocodile alligator clip, 20 x Male to Male Jumper Wire

Combo of MB102 Breadboard Power Supply with 830 Point Breadboard

Specification:-

• MB-102 3.3V/5V Power Supply Module
• Compatible with 5V, 3.3V
• Input Voltage: 6.5–12V (DC) or USB Power
• Output voltage: 3.3V, 5V switchable
• Tie points : 830
• Dimensions : 175mm Length x 67mm breadth
• Mounting holes : M2
• Accepts 20-29 AWG wire sizes

Package Included:- 1 x 830 Points Breadboard, 1 x MB-102 Power Supply Module

Combo of 60W Black Soldering Iron with Digital Multimeter

Specification : 

• AC voltage measuring range: 200V to 750V
• DC voltage measuring range: 200mV to 1000V
• DC current measuring range: 200µA to 10A
• Operating voltage: 220V to 230V
• Power rating: 60W
• Cable length: 125cm or 1.25meter
• Quick in attaching working temperature

Combo of Jumper wire with SG90 small Motor & Ultrasonic Module (122 Item)

Specification:-

• Ultrasonic Module HC-SR04 
• Operating voltage: 5V DC
• Operating current: 15 mA
• SG90 Hard plastic gear servo motor
• 40 Pin Female to Female Jumper Wire
• 40 Pin Male to Male Jumper Wire
• 40 Pin Male to Female Jumper Wire

Package Included:- 1 x SR04 Ultrasonic sensor , 1 x SG90 Servo Motor, 40 x Female to Female Jumper Wire, 40 x Male to Male Jumper Wire, 40 x Male to Female Jumper Wire

Combo of MB102 3.3V/5V Power Supply Module with 9V Battery Clip, Alligator Clip, Capacitor, LED & Jumper Wire (77 pcs)

Specification:-

• 3.3V/5V Breadboard Power Supply Module
• 40mm crocodile alligator clip
• Battery clip connector with 3.5mm pin jack
• 26AWG Jumper Wire cable
• 5mm LED (Green, Blue, Red, Yellow, White)

Package Included:- 3pcs power supply module, 3pcs 9V battery clip, 4pcs  Alligator clip, Jumper wire (Female to Female, Male to Female, Male to Male) 10 pcs each, LED (Green, Blue, Red, Yellow, white) 5 pcs each, Capacitor 50V (22uf, 47uf, 33uf, 100uf, 22uf, 4.7uf, 220uf, 10uf, 1uf, 3.3uf, 10uf, 470uf) 12 x pcs 

Combo of Nano R3 CH340 Development Board with Jumper Wire & Ultrasonic Module HC-SR04 (123 Item)

Specification:-

• Model name : NANO R3
• Recommended operating voltage range : 5V to 12V
• Digital input/output pins : 14 (of which 6 provide PWM output)
• Clock frequency : 16MHz
• Operating voltage: 5V DC
• Measure angle: 15°
• Operating current: 15mA
• Working voltage : 5V(DC)

DIY Fire Detector Project Kit with Water Pump | Learing Kit for School Project (27 Item)

Specification:-

• Model name : 6F22M
• High-performance battery
• Power Source: DC
• Working voltage:  6V to 12V
• Power current:  1.9A
• Output channel : 1
• Detect range : 60 degrees
• On-board LM393 chip

Package Included:- 1 Pcs PCB Board, 1 Pcs 9V Toy battery, 1 pcs battery clip connector, 1 pcs TIP 31C IC, 1 pcs multicolor Ribon Cable, 1 pcs Flame Sensor, 10 pcs 1/4w 1Ohm Resistor, 1 pcs Water pump with 1m PVC Tubing, 10 Pcs Female to Female Jumper wire

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

DIY Alcohol Ethanol and Breath Gas Dectection Kit|Science Project Kit (52 Item)

Specification:-

• IC name : LM393
• Operating voltage : DC 3V to 5V
• Ambient temperature: -10℃ to 65℃
• Working voltage: 6V to 12V
• Max. flow : 50 liter/hour

Package Included:- 1 Pcs 9V Battery, 1 Pcs 9V Battery Clip connector, 1 Pcs TIP 31C, 1 Pcs Multicolore Ribon Cable, 1 Pcs PCB Board, 1 Pcs water motor pump with 1M Pipe ,1 Pcs Gas Detection Module, 5 Pcs 1/4w 100 Ohm Resistor, 40 Pcs Female to Female Jumper wire

Combo of Jumper wire with Breadboard | DHT11 Sensor Module | LCD Display & R3 AVR USB Development Board (125 Item)

Specification:-

• DHT11 5V Sensor Module
• 16 x 2 LCD Green & Yellow display
• LCD Size : 16 x 2 (16 character x 2 rows)
• 400 point Breadboard 
• Breadboard Dimensions : 82mm x 55mm 
• R3 CH340G 5V development board 
• Model name : UNO R3 

Combo of Mini Water Pump & 9V Battery with Soil Moisture Sensor for Automatic Watering System Manager (47 Item)

Specification:-

• Operating voltage: 3.3V to 5V
• Power Source: DC
• Material: Polyvinyl Chloride
• Number of channels: 1
• Relay maximum current:  10A
• Length of the wire : 6cm
• Wire color : Red and Black

Package Included:- 1 Pcs 5V Relay Module 2 pcs 9V Battery 2 pcs Battery Clip Connector 1 Pcs Soil Moisture Sensor 1 pcs Water Pump with 1 Meter Tubing 40 pcs Female to Female Jumer wire.