THE GREAT COMBO'S

Combo of XH-W1209 Temperature Controller | Probe | 3.5" 24V Cooling Fan | 12V 1A Power Adapter (5 Items)

Specification:-

1.XH-W1209

• Temperature Range: -50°C to 110°C
• Operating Voltage: 12V DC
• Temperature Control Mode: Heating & Cooling
• Accuracy: ± 0.1°C
• Relay Output: Supports up to 10A load

2. 24V DC Cooling Fan

• Operating Voltage: 24V DC
• Compact Size: 3.5 inches for versatile cooling applications
• High-Speed Airflow: Ensures efficient cooling for electronics and enclosures
• Low Noise Operation: Provides effective cooling with minimal noise
• Durable & Reliable Build: Ideal for continuous operation

3.DC Power Supply Adapter

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 1A
• Connector Type: Standard 5.5mm x 2.1mm DC plug
• Short-Circuit & Overload Protection for device safety
• Lightweight & Compact Design for easy portability

Ultimate Starter Learning Kit with HC-SR04 Ultrasonic Distance Sensor, LED Displays (128 Item)

Specifications:-

• Operating voltage: 5V DC
• Operating current: 15mA
• Color of display: Green
• Working frequency: 40Hz
• Output high VOH: 0.8VCC V
• Output low VOL: 0.3VCC V
• Response time (touch mode): 60 mS
• Size : 16 x 2 (16 character x 2 rows)
• Power supply voltage(VCC): 2.0, 3, 5.5 V.
• Thermistor temperature range -55 °C to 125 °C

Package Include:- 20 pcs LED 5pcs Each Value( Green, Yellow, Red, Blue), 1 pcs Ultrasonic Sensor, 1 pcs 1 Digit 7 Segment Display, 1 pcs 4 Digit 7 Segment Display, 1 pcs 16x2 LCD, 1 pcs SG90 Servo Motor, 1 pcs 5 mm infrared receive, 1 pcs LDR (GL5528), 1 pcs NTC 10K metal oxide thermistor, 1 pcs RGB LED,1 pcs 100 uf 25V Polarized electrolytic capacitor, 1 pcs Touch Switch Module, 2 pcs IC L293D,1 pcs DHT 11 Sensor,10 pcs Resistor ( 1K ), 10 pcs Resistor ( 10K), 10 pcs Resistor ( 22K), 10 pcs Resistor ( 100K), 3 pcs Potentiometer (10K, 4 pcs Push Button switch with Cap  (12x12x7mm), 1 pcs 5V Buzzer, 1 Pcs 12V Buzzer, 1 Pcs Breadboard, 20 pcs Male to Male Jumer wire , 20 pcs Male to Female Jumper wire, 1 pcs 5V 1 channel relay module, 1 pcs 3V DC Small carbon motor, 1 pcs 4 Blade fan,1 pcs Soil Hygrometer Humidity.

Combo of 12V 2A DC Power Supply Adapter with 5.5mm Male Connector & RGB Controller Multifunctional

Specification:-

• Input voltage : 100V to 265V AC
• Output voltage: 10 to12V
• Power rating: 2A
• Max. frequency range: 50 to 60 Hz
• Cable length: 1.10 meters
• Working temperature:- 20-60 °C
• Remote distance:- 100m

R3 CH340G Development Board Combo | L298N Motor Driver | SG90 180° Servo Motor | DIY Robotics Kit

Specification: 

• Operating voltage: 3V to 7.2V
• Recommended voltage: 5V
• Rotation: 0°-180°
• The operating speed is 0.1s/60° (4.8V)
• Chip name : ATMEGA328
• Clock frequency : 16Mhz
• Digital input/output pins : 14 (of which 6 provide PWM output)
• Driver module : L298N
• Maximum power : 25W
• Driver current : 2A

Package Included:-  1 Pcs L298N Motor Drive,1 Pcs SG 90 Motor,1 Pcs R3 CH340G Development Board

Combo of DIY Starter Kit with UNO Board | Resistor & Jumper wire (113 Item)

Specification:-

• Resistor type: carbon film resistor
•  HC-SR04 Ultrasonic Sensor
• 400 points Half size Solderless breadboard 
• 10mm Yellow Dip Led round shape
• 9V battery clip connector
• UNO R3 CH340G development board
• Soil Hygrometer Humidity Detection Moisture Sensor 

Package Included: 1 pcs UNO Board | 1 pcs Breadboard | 1 pcs Ultrasonic Sensor | 1 pcs water sensor | 1 pcs USB Cable | 5 pcs Yellow LED | 5 pcs Red LED | 5 pcs Green LED | 1 pcs 9V battery connector | 2 pcs 1 Digit 7 segment Display | 1 pcs 5V Buzzer | 1 pcs Soil Hygrometer Humidity Sensor | 40 pcs Male to Female Jumper wire | 6 pcs push button switch with Cap (12x12x7mm) | 1 pcs IR Proximity Sensor | 10 pcs Resistor (1K) | 10 pcs Resistor (10K) 10 pcs Resistor | (22K) 10 pcs Resistor | (100K) 1 pcs LDR sensor module (LM393)

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

Ultimate UNO R3 Professional Starter Kit | Compatible with Arduino IDE | DIY Electronics Kit (160 Item)

Specification:- 

• Complete Ultimate Arduino Professional Kit with 100+ components.
• Includes an Uno R3 and a large breadboard with a power supply.
• 12 x 12 x 7 mm tactile switches
• ESP8266 Wireless WiFi Transceiver
• L293D 4-Channel DC Motor Driver
• Resistor type: 1/4 watt carbon film resistor
• Modules: ESP8266 Wi-Fi, Bluetooth, RC522 RFID, and IR Remote.
• Sensors: PIR, DHT11, Ultrasonic, IR, Soil, Raindrop, Touch, etc.

Kit Included:

28BYJ-48 5V DC Small Stepper Motor with 60mm x 5.7mm Plastic Wheel

Specification:-

• Operating voltage: 5V
• Operating current: 0.5A
• Step angle: 5.6°
• Motor speed: 15 rpm
• Torque: 300g per cm
• Reduction ratio: 64:1
• JST Connector size: 2510
• Shaft type: Dual D-shaped sides
• Diameter of the wheel: 60mm
• Width of the wheel: 5.7mm

Level-2 Advanced Starter Kit Compatible with Arduino IDE & Uno R3 | RFID, Bluetooth & IoT Learning (114 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• Includes an Uno R3 and 830-point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• Resistor type: 1/4 watt carbon film resistor
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• Resistor type: 1/4 watt carbon film resistor (220K, 330K, 1K)

Kit Included: 1 pcs Adruino Uno R3 | 1 pcs 830 Points Breadboard | 1 pcs USB Cable | 40 pcs Jumper Wires (Male to Male / Female to Male mix) | 1 pcs 1602 LCD Display | 1 pcs 7 Segment Display (1 Digit) | 1 pcs 4×4 Keypad | 1 pcs Stepper Motor | 1 pcs Stepper Motor Driver Module | 1 pcs Servo Motor (SG90) | 1 pcs Potentiometer (10K) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs IR Remote + IR Receiver | 1 pcs RTC (Real Time Clock) Module | 1 pcs RFID Module with Tag & Key | 1 pcs Joystick Module | 1 pcs Photoresistor (LDR Sensor) | 1 pcs Flame Sensor | 1 pcs Tilt Switch / Vibration Sensor (small module) | 1 pcs Sound Sensor Module | 1 pcs Water Sensor Module | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs RGB LED Module | 1 pcs DC Motor Driver IC Module (L293D based) | 1 pcs 5V Relay Module | 1 pcs Battery Plug (9V Connector) | 30 pcs Resistor Pack (assorted values) | 15 pcs LEDs (Red, Green, Yellow)  | 5 pcs Push Button with Caps

Smart Learning Robotics & IoT Kit | Beginner to Advanced STEM Project Kit | Compatible with Arduino IDE & Uno R3 (154 Item)

Specification:-

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• ESP8266 Wireless WiFi Transceiver
• DC toy Motor Driver with wire
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1 pcs Uno R3 Board | 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard Small Size with 400 Points Solderless | 2 pcs Push Button with Caps | 1 pcs Potentiometer | 1 pcs ESP01 8266 | 1 pcs 7 Segment 1 Digit Cube Display | 1 pcs IC 74HC595 | 1 pcs Transistor PNP2222 | 15 pcs LEDs (Red, Blue, Green) | 1 pcs DHT11 with PCB (3 pin) | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs RGB LED with PCB | 1 pcs 1602 I2C LCD Display | 1 pcs Active Buzzer | 1 pcs Passive Buzzer  | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs HC05 Bluetooth Module | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K assorted) | 20 pcs Jumper Wire (Male to Male) | 20 pcs Jumper Wire (Female to Female) | 20 pcs Jumper Wire (Female to Male) | 1 pcs Diode 1N4001 | 1 pcs 5V Relay Module | 2 pcs IR Line Sensor | 2 pcs Photoresistor | 1 pcs L293D Motor Driver Shield with soldered pins | 1 pcs Power Supply Box (6 Cell Holder) | 1 pcs Ultrasonic Sensor Holder | 1 pcs 2WD Car Chassis

Wireless IoT Starter Kit with NodeMCU ESP8266 | Compatible with Arduino IDE (237 Item)

Specification:-

• 1/4-watt Resistors
• 5V Piezoelectric Buzzer
• 830 points Half-size breadboard 
• 12 x 12 x 7 mm tactile switch
• USB Cable for Arduino Nano
• MB-102 Power Supply Module
• Wi Fi Networking Esp8266 Development Board

Package Included:- 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard (Large) | 1 pcs Breadboard Power Supply Module | 5 pcs Push Button  | 1 pcs Potentiometer 10k | 1 pcs Photoresistor (LDR Sensor) | 1 pcs L293D Motor Driver IC | 3 pcs IC 74HC595 Shift Register | 4 pcs 2N2222 NPN Transistor | 25 pcs LEDs (White, Red, Blue, Yellow, Green)   | 1 pcs Fan (DIY Propeller) | 1 pcs DC Motor | 1 pcs 7 Segment Display (4 Digit) | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 1 pcs Bar Graph LED Module | 1 pcs 5V Relay Module | 1 pcs RGB LED Module | 40 pcs Jumper Male-to-Male | 40 pcs Male-to-Female Jumper Wires | 1 pcs Bidirectional Logic Level Converter (Translator) | 2 pcs 1N4007 Diode | 1 pcs USB Cable | 1 pcs 9V Battery Holder with Connector | 100 pcs Resistor Pack (assorted values) (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register