THE GREAT COMBO'S

Super Mega 2560 Starter Kit | Complete Beginner’s Learning Kit Compatible with Arduino IDE (136 Item)

Specification:-

• MEGA2560 MCU REV3 development board
• 5mm round shape LED 
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• 12x12x7.3 mm Push Button Switch with Cap 
•  Yellow/Green LCD display module

Kit Included: 1 pcs Aadruino Mega 2560 Board | 1 pcs Mega 2560 Shield | 1 pcs Remote (IR Remote Control) | 1 pcs 1602 LCD Display | 1 pcs 830 Points Breadboard | 1 pcs 40 Pin Header | 1 pcs Potentiometer | 30 pcs LED (Red, Green, Blue) | 1 pcs USB Cable | 20 pcs Jumper Wires (Male to Male) | 20 pcs Jumper Wires (Female to Male) | 1 pcs 9V Battery Supply Connector | 4 pcs Push Button with Caps (Colored) | 1 pcs Stepper Motor with Driver | 1 pcs Mini Breadboard | 1 pcs Servo Motor (SG90 9G) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs 4-Digit 7 Segment Display | 1 pcs 1-Digit 7 Segment Display | 1 pcs IC 74HC595 | 1 pcs Flame Sensor | 1 pcs Photoresistor (LDR Sensor) | 1 pcs NPN Transistor | 1 pcs IR Receiver Module | 1 pcs Vibration Sensor / Tilt Sensor | 40 pcs Resistors – (1K, 10K, 220Ω, 330Ω)

3-in-1 Robotics Starter Kit | Multipurpose DIY Robot Kit | Compatible with Arduino Uno R3 (181 Item)

Specification:

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7.3 mm tactile switch with cap
• ESP8266 Wireless Wi Fi Transceiver
• DC toy Motor Driver with wire
• 1 Digit 7 Segment LED Display
• Jumper Wire Cable 26AWG (21cm)
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1x Uno R3 Board | 1x Breadboard (400 points) | 1x 7 Segment Display (1 Digit) | 2x Push Buttons (with caps) | 1x Potentiometer | 1x DC Motor | 1x SG90 Servo Motor | 1x RGB LED Module | 2x Transistor PN2222 | 15x LEDs (Red, Green, Blue) | 1x Active Buzzer | 1x Passive Buzzer | 1x HC-SR04 Ultrasonic Sensor | 10x Resistors 220Ω | 10x Resistors 1kΩ | 40x Female-to-Female (F-F) Jumper Wires | 40x Male-to-Female (M-F) Jumper Wires | 40x Male-to-Male (M-M) Jumper Wires | 2x Diode 1N4001 | 1x Relay Module | 2x Line Sensor  | 2x Photoresistor Sensor  | 1x L293D Motor Driver Shield | 1x Battery Power Supply (with holder) | 1x Ultrasonic Sensor Holder | 1x 2WD Car Chassis

Super Starter UNO R4 Minima Kit | DIY Electronics & Robotics Kit for Beginners to Advanced Users (105 Item)

Specification:-

• Compatible with UNO R4 Minima Board
• Fully supports Arduino IDE programming environment
• Includes a wide range of electronic components, sensors, and modules
• Plug-and-play breadboard for easy prototyping without soldering
• Durable and reusable components for multiple projects
• Suitable for beginners, hobbyists, and intermediate learners

Kit Included:
1x Compatible R4-Lite Minima Board | 1x Type-C Cable | 1x 830 Point Breadboard | 1x Servo Motor | 40x Male-to-Male & Male-to-Female Jumper Wires | 1x 0.96 inch OLED Display | 1x Photoresistor (LDR) | 1x DHT11 Temperature & Humidity Sensor | 1x Potentiometer 10K | 30x Resistor Pack – 220Ω, 1KΩ, 10KΩ | 1x Active Buzzer | 1x Passive Buzzer | 1x Ultrasonic Sensor (HC-SR04) | 6x Push Switch with caps | 1x RGB LED Module | 15x LEDs (Red, Green, Yellow) 1x Tilt Sensor | 1x IR Sensor | 1x Flame Sensor

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Beginner's Kit for Uno R3 | DIY Electronics & STEM Starter Kit | Compatible with Arduino IDE (57 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• 12 x 12 x 7 mm tactile switch
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• SG90 Servo Motor
• UNO R3 AVR USB Development board
• Light Dependent Resistors sensor
• Resistor type: 1/4 watt carbon film resistor (220K, 330K)

Kit includes:-

1x Uno R3 Board | 1x USB Cable | 20x LEDs (Red, Yellow, Blue, Green) | 1x Potentiometer | 6x Push Button Switch | 2x Photoresistor | 20x Resistor | 1x RGB Led | 1x 7-Segment 1-Digit | 1x Breadboard 400 Point | 1x Buzzer | 1x Servo Motor | 1x Vibration Switch

46-in-1 DIY Sensor Kit (37-in-1 + Extra Modules) | Compatible with Arduino IDE & Raspberry Pi

Specification:-

• Modules Included: 46 modules (37-in-1 sensor kit + 9 additional modules)
• Durability: High-quality, reusable modules designed for long-term experimentation
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• Programming Support: Fully supports Arduino IDE, Python, and Scratch-based coding platforms

Package includes:
1x Real time clock | 1x Joystick | 1x 5v relay | 1x Big sound | 1x Small sound | 1x Tracking | 1x Avoidance | 1x Water sensor | 1x Flame sensor | 1x Linear hall | 1x Touch sensor | 1x Digital temperature | 1x Active buzzer | 1x Passive buzzer | 1x  rgb | 1x Ultrasonic sensor | 1x Two color led | 1x Mini two color led | 1x Reed | 1x Mini reed | 1x Mpu 6050 | 1x Heartbeat | 1x 7 Color led | 1x Mp1584en | 1x Push button | 1x Shock sensor | 1x Rotatory encoder | 1x Light cup | 1xTilt switch | 1x Ball switch | 1x Photo resistor | 1x Gas sensor | 1x Analog hall | 1x Magnetic hall | 1x Temp 18b20 | 1x Analog temp | 1x IR Receiver | 1x Light blocking | 1x Sd card reader | 1x IR emitter | 1x Temp and humidity | 1x Laser emitter | 1x Smd rgb | 1x Soil moisture sensor | 1x Tap module | 1x Breadboard power supply.