ALL ELECTRONICS COMPONENTS

8cm x 12cm Copper clad double side universal printed circuit board or PCB pack of 5pcs

Specification

1. Copper clad coating PCB
2. Dimension : 8cm x 12cm
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

DO-41, R1500 1500V High Voltage Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 1500v
2. Maximum average rectified current : 0.5A
3. Maxim reverse current : 5.0µA
4. Case :  DO-41
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 2.0V

1K ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 1K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

T1117-3.3 SOT 223 Voltage Regulator Pack of 100pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 3.267-3.333

1N4735A 6.2V 1 watt Zener diode pack of 50pcs

Specification

• Nominal Zener Voltage (VZ): 6.2V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 146mA

472, 50V Multilayer Ceramic Capacitor 4700PF (20Pcs)

Specification

1. Part no:   CT4-0805Y472M500
2. CAP :       4700PF
3. Tolerance Rating: ±20 %
4. Voltage Rating:  50 V
5. Material: Ceramic

ES1J 600V 1A Surface mount glass passivated superfast SMD diode pack of 50pcs

Specification

1. Maximum repetitive reverse voltage: 600V
2. Nonrepetitive peak forward surge current: 30A
3. Maximum forward voltage: 1A
4. Maximum forward current: 1A
5. Power dissipation: 1.47W
6. Reverse recovery time: 35ns

1000uf 35V Aluminum Electrolytic Capacitors (13 X 25 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 13 x 25 mm
• Impedance (O)max. 20°C 1000KHz = 30
• Ripple current = 1650
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

S2M 1000V 2A Surface mount glass passivated superfast SMD diodes box of 3000pcs

Specification

1. Max. repetitive reverse voltage: 1000V
2. Forward current: 2A
3. Power dissipation: 2.35Watt
4. Max. peak forward surge current: 50A
5. Max. DC reverse current: 125µA

50Pcs 18k Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 18k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 18K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

74HC147 Priority Encoder IC 16-Pin

Specification:-

• Number of pins: 16
• Max Supply Voltage: 5.5V
• Max Input Voltage: 7V
• DC Input Diode Current: ± 20 mA
• DC Output Diode Current: ± 20 mA
• DC Output Source or Sink Current per Output Pin: ± 25 mA
• DC VCC or GND Current, per pin: ± 50 mA
• Temperature Range: − 65°C to + 150 °C

SC6021G A50K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%