ALL ELECTRONICS COMPONENTS

1000 Pcs 220K Ohm (Ω) 1 Watt ±5% Tolerance 220K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 220K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

DO-201AD, UF5408 1000V High Efficiency Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 1000v
2. Maximum average rectified current : 3.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.7V
7. Maximum reverse recovery time : 75ns

MPSA43 500mA 200V TO-92 Package NPN Darlington Transistors pack of 10 pcs

Specification

• Package Type: TO-92
• Transistor Type: NPN Darlington
• Collector - Emitter voltage:  200 volts
• Collector current:  500 mA
• Gain H(fe):  80/250
• Power dissipation:  625 mW
• F(t) minimum:  50 MHz
• Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

400 points Half size Solderless breadboard for prototype circuits pack of 10pcs

Specification:

• Tie points: 400
• Dimensions : 82mm Length x 55mm breadth
• Mounting holes: M2
• Accepts 20-29 AWG wire sizes
• Use to make the base of the prototype circuit
• Reusable, solderless, and easy to use

2.2μF 205J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V 
2. Dimensions = 25.0mm(W)
3. Dimensions = 17.5mm(H)
4. Dimensions = 12.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≥ 1250S Ω 

CD4532 8 Bit Priority Encoder IC (DIP-16 Package)

Specification:-

• Noise margin (full package-temperature range):
• 0.5 V at VDD = 5 V
• 1.5 V at VDD = 10 V
• 1.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Digital input leakage: 5uA)
• Operating Temperature Range (TS): −55°C to +125°C

SC608N A10K 90mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

4.7μF 475J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 30.mm(W)
3. Dimensions = 20.0mm(H)
4. Dimensions = 12.0mm(T)
5. Dimensions = 25.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

Red color Potentiometer knob Rotary switches caps pack of 50pcs

Specifications

1. Material: Bakelite
2. Color: Red and Black
3. Uses : φ6-axis potentiometer, band switches, buttons, and so on
4. Spot : Shaft hole 6mm 6.4mm
5. Diameter : 16mm (approx)
6. Height : 15mm (approx)
7. Fixation : By pressing down

CD4053BE Triple 2 channel analog multiplexer DIP 16 pins IC pack of 10pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

CD4047 Low power monostable astable multi vibrator 14 pins IC pack of 50pcs

Specifications

1. Low power multi vibrator circuit IC
2. Operate in both Monostable and Astable operation
3. Supply voltage range : 3V to 15V
4. DC input current  :  10mA
5. Number of pins : 14
6. Low power consumption
7. High noise immunity

50Pcs 1.8K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 1.8K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 1.8K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V