ALL ELECTRONICS COMPONENTS

12MHz Electronic quartz crystal oscillators KDS12.000 through hole 2 pins pack of 100pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  18pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

SC608N A10K 90mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

0.10μF 104J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250VAC
• Dimensions = 25.0mm(W)
• Dimensions = 15.5mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 20.0mm(P)
• Dimensions = 0.8(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

IRFP150N 100V 42A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 100V
• Continuous Drain Current (Id): 42A
• Drain-Source Resistance (Rds On): 0.036 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 110 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 160W

270uf 450V Aluminum Electrolytic Capacitors (30 x 40mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 30 x 40 mm
  
• Ripple current = 1.78
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"

L293D Quadruple half-H driver or motor driver 16 pins IC pack of 50pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

R-6, FR602 100V Fast Recovery Rectifiers Diode pack of 5pcs

Specification 

1. Maximum respective peak reverse voltage : 100v
2. Maximum average rectified current : 6.0A
3. Maxim reverse current : 10µA
4. Case :  R-6
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 1.3V
8. Maximum reverse recovery time  150ns

20 Pcs 18K Ohm (Ω) 1 Watt ±5% Tolerance 18K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 18K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

4.7μF 475J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 30.mm(W)
3. Dimensions = 20.0mm(H)
4. Dimensions = 12.0mm(T)
5. Dimensions = 25.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

SC6080GH B20K 75mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 20KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

0.0022μF 222J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 14.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 8.0mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

2.2μF 205J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V 
2. Dimensions = 25.0mm(W)
3. Dimensions = 17.5mm(H)
4. Dimensions = 12.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≥ 1250S Ω