ALL ELECTRONICS COMPONENTS

KBPC25, KBPC2510 25A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

2902N Single supply quad operational amplifier DIP 14 pins IC pack of 50pcs

Specification

1. Single supply
2. High output voltage
3. Supply voltage :  16V to 32V
4. Power dissipation : 300mW
5. Number of pins : 14
6. Slew rate : 0.5V/μs
7. low operating voltage : 1mA

1N5819S 40V ,A-405 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 40V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 25A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : A-405

0.1uf 1206 50V (104) SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 0.1uf
• Tolerance :  ± 10%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

24V 0.5 watt 1N4749 Zener diodes ±5% voltage tolerance box of 2500

Features:-

• Type : BZX55C24V ST
• Nominal Zener Voltage (VZ): 24V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 1000mA

1000 Pcs 4.7 Ohm (Ω) 1 Watt ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 4.7 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

100uf 10V Aluminum Electrolytic Capacitors (5 X 11 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 5 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 300
• Ripple current = 150
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

CD4017 Decade Counter IC (DIP-16 Package)

Specification:-

• Wide supply voltage range: 3.0V to 15V
• High noise immunity: 0.45 VDD (typ.)
• Input Voltage: −0.5 VDC to VDD +0.5 VDC
• Storage Temperature: −65°C to +150°C
• DC Supply Voltage: −0.5 VDC to +18 VDC
• Power Dissipation: Dual-In-Line: 700 mW
• Lead Temperature: 260°C

TO-92 78L18, 3-Terminal Positive Voltage Regulator IC pack of 5pcs

Specification

1. Output Current Up To 1.5 A
2. Input Voltage17.3V To 18.7V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

68uf / 400V Aluminum Electrolytic Capacitors (22 x 30)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 22 x 30mm
4. Voltage Rating :  400V
5. Capacitance: 68uf
6. Capacitance tolerance : ±20%(M)

0.068μF 683J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 29.0mm(W)
• Dimensions = 21.0mm(H)
• Dimensions = 13.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

MPSA94, -300mA, -400V TO-92 Package PNP Darlington Transistors pack of 10 pcs

Specification

1. Package Type: TO-92
2. Transistor Type: PNP Darlington
3. Max Collector Current(IC): -300mA
4. Max Collector-Emitter Voltage (VCE): -400V
5. Max Collector-Base Voltage (VCB): 30V
6. Max Emitter-Base Voltage (VEBO): 10V
7. Max Collector Dissipation (Pc): 625 milliWatt
8. Max Transition Frequency (fT): 50 MHz
9. Minimum & Maximum DC Current Gain (hFE): 50/300
10. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade