ALL ELECTRONICS COMPONENTS

470uf 25V Aluminum Electrolytic Capacitors (10 X 16 mm) pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 42
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

0.56 inch 4 digit Red display color 7 segment LED display COMMON CATHODEs pack of 50pcs

Specification

1. Number of digit : 4
2. Display type : 7 segment
3. Configuration : common cathode
4. Number of pins : 12
5. LED color : Red
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

FMS4 PNP SOT23-5L Bipolar Transistors Pack of 5pcs

Specification:-

• Polarity: PNP
• Maximum Collector-Base Voltage |BVCBO|: 120 V
• Maximum Collector-Emitter Voltage |BVCEO|: 120 V
• Maximum Emitter-Base Voltage |BVEBO|: 50V
• Forward Current Transfer Ratio (hFE), MIN: 120

L298N Dual Full Bridge Driver IC Multiwatt-15 Package

Specification:-

• Supply voltage: 50 V
• Logic supply voltage: 7 V
• Ven-Input and Enable Voltage: -0.3 to 7 V
• Vsens-Sensing Voltage: -1 to 2.3
• Ptot-Total Power Dissipation: 25 W
• Junction temperature range: -25 to 130 °C
• Storage temperature range: -40 to 150 °C

GBJ6, GBJ2510 1000V 25A Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Maxim forward voltage : 1.1V

1000 Pcs 18K Ohm (Ω) 1 Watt ±5% Tolerance 18K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 18K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

BF422 Bipolar High voltage NPN transistors pack of 100pcs

Specification:-

1. Transistor type  :  High voltage NPN transistor
2. Maximum Collector power dissipation  :   0.83W
3. Maximum Collector-Base voltage  :  250V
4. Maximum Collector-Emitter voltage  :  250V
5. Maximum Emitter-Base voltage  :  5V
6. Maximum Collector current   :  0.05A
7. Transition frequency  :  60 MHz
8. Collector capacitance  :  1.6 pF

TIP41C General purpose NPN transistors box of 100pcs

Specification:-

1. Transistor type  :  General purpose NPN transistor
2. Max Collector Current  :  6A
3. Max Collector-Emitter Voltage  :  100V
4. Max Collector-Base Voltage  :  100V
5. Max Emitter-Base Voltage  :  5V
6. Max Collector Dissipation  :  65W
7. Max Transition Frequency  :  3MHz

450uf 82V Polarized Electrolytic Capacitor

Specification

• Terminals: 2
• Material: Aluminium
• Voltage Rating :  82 V
• Capacitance: 450uf
• Smooth noise

100uf / 16V Electrolytic Capacitors (5 X 11mm) Pack of 5

Specification:-

• Capacitor Value: 100
• Voltage: 16V
• Operating temperature: -40ºC to 125ºC
• Tolerance: ±20%
• Size: 5x11

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 50pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

GPF X2 2.2µF K 275VAC Electromagnetic Interference Suppression Capacitor pack of 5pcs

Specification

1. Rated voltage : 275VAC
2. Dimensions = 32.0mm(W)
3. Dimensions = 33.0mm(H)
4. Dimensions = 18.0mm(T)
5. Dimensions = 27.5mm(P)
6. Standard  =  GB/T 14472-98
7. Capacitance Tolerance = ±5%(K)
8. Insulation Resistance = > 15000M Ω